Abstract:The emergence of additive manufacturing (AM) technologies, such as fused deposition modeling (FDM), have enabled the realization of structures with superior mechanical performance through lightweighting and multi-material architectures. However, the complexity associated with the internal geometric features and potential material configurations have also presented new challenges in designing these structures to optimize mechanical performance. In particular, the failure mechanisms and their relationship to the load bearing capacity of the structures may vary compared to analogous structures designed using conventional manufacturing techniques. In this work, we investigate failure modes of 3 D-printed (3DP) multi-material polymer sandwich beam structures manufactured from acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) materials and subjected to three-point bend loading. Digital Image Correlation (DIC) is utilized to understand the effects of different process parameters on the mechanical response of the 3DP structures. ABS and PC dogbone tensile specimens were printed to establish the baseline properties in tension with varying raster angles and infill patterns. Multi-material sandwich beam structures were then printed with honeycomb cores using different processing and architectural parameters, and the failure modes and loads of these structures were compared with predications from a failure model for sandwich structures that accounts for the following conventional failure modes: (1) indentation, (2) face sheet bending, (3) core bending, and (4) core shear. With minor changes in the processing and geometric parameters, failure modes could be shifted from the face sheets to core bending and core shear, as evidenced by the DIC strain field measurements, and the corresponding max load-to-weight ratios could be increased. Estimations of the tensile properties of the face sheets and core were found to be sufficiently accurate when combining classical lamination theory (CLT) and rule-of-mixtures (ROM) models, while the failure model also predicted the load bearing capacity and failure mode in three-point bending with reasonable accuracy.

Double diaphragm forming simulation for complex composite structures

Efficient numerical analysis of in-plane compression-induced defects in thick multi-ply woven textile preforms during double diaphragm forming

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

An accurate forming model for capturing the nonlinear material behaviour of multilayered binder-stabilised fabrics and predicting fibre wrinkling

Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML)

DIC‐measurement during tensile testing and its approach for the FEM‐simulation of "Die‐Less‐Hydroforming"

Validation of a Simulation Methodology for Thermoplastic and Thermosetting Composite Materials Considering the Effect of Forming Process on the Structural Performance

Fabric draping simulation in composites manufacturing. Part I: Description and applications

Prediction of forming effects in UD-NCF by macroscopic forming simulation – Capabilities and limitations

Fast Optimisation of the Formability of Dry Fabric Preforms: a Bayesian Approach

Sheet forming of the multi-layered biaxial weft knitted fabric reinforcement. Part I: On hemispherical surfaces

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

Modeling and simulation of the flow drill screw process of a DP590/Al6061-T6 multi-material joint used for vehicle body

Predicting failure modes of 3D-printed multi-material polymer sandwich structures from process parameters

Large deformation of variable thickness woven composite preforms considering interlayer difference. Application: Forming simulation of a blade preform

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

A review of the formability of woven fabrics for composite materials