Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Approach of the constitutive material behaviour of textile composites through simulation

Finite element simulation of textile materials at the fiber scale

Microscopic approaches for understanding the mechanical behaviour of reinforcement in composites

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

A Finite Element Approach of the Behaviour of Woven Materials at Microscopic Scale

Different approaches for woven composite reinforcement forming simulation

Computational Modeling of Polymer Matrix Based Textile Composites

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

FEM Analysis of Textile Reinforced Composite Materials Impact Behavior

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Mesoscopic analyses of the draping of 3D woven composite reinforcements based on macroscopic simulations

A simplified constitutive and finite element model of plain weave fabric reinforcements for the biaxial loading

Multi-scale analysis of the mechanical behaviour of a flax fibre reinforced composite under low-velocity impact

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

Incorporation of compaction effects in the automated generation of 3D woven composites representative volume elements by geometrical modelling

Probabilistic Finite Element Modeling of Textile Reinforced SHCC Subjected to Uniaxial Tension

Predicting the Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method

Determining the Damage and Failure Behaviour of Textile Reinforced Composites under Combined In-Plane and Out-of-Plane Loading

Numerical modeling of fiber reinforced polymer textile composites for characterizing the mechanical behavior – a review

Multi-scale computational homogenisation to predict the long-term durability of composite structures