Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Increased Porosity in NiO-YSZ Tubular Substrate for High Performance Solid Oxide Electrolysis Cell Using LaGaO3 Film

Controlled Pore Size of NiO-YSZ Tubular Substrate for Improved Performance of Reversible Solid Oxide Cell Using LaGaO3 Electrolyte Film

Microstructure Tailoring of the Nickel Oxide-Yttria-Stabilized Zirconia Hollow Fibers Toward High-Performance Microtubular Solid Oxide Fuel Cells

Planar type reversible solid oxide cells using LaGaO 3 electrolyte thin-film prepared by dip-coating and co-sintering method

Study on Preparation of YSZ Film by Electrophoretic Deposition under Constant Current and Its Application in SOFCs

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC

NiO+YSZ Anode Substrate for Screen-Printing Fabrication of YSZ Electrolyte Film in Solid Oxide Fuel Cell

Infiltration of La0·6Sr0·4FeO3-δ Nanoparticles into YSZ Scaffold for Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Preparation of YSZ Film by EPD and Its Application in SOFCs

High Performance Anode-Supported Tubular Solid Oxide Fuel Cells Fabricated by a Novel Slurry-Casting Method

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Fabrication and Evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ Co-Impregnated Yttria-Stabilized Zirconia Anode for Single-Chamber Solid Oxide Fuel Cells

Co-synthesized Y-stabilized Bi2O3 and Sr-substituted LaMnO3 Composite Anode for High Performance Solid Oxide Electrolysis Cell

Preparation of LSM–YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism

LaNbO4–NiO–Y2O3 Stabilized ZrO2 Anode‐Support Materials for Solid Oxide Fuel Cells

Electrochemical Characteristics of Solid Oxide Fuel Cell Cathodes Prepared by Infiltrating (la,sr)mno3 Nanoparticles into Yttria-Stabilized Bismuth Oxide Backbones

Anode-supported Solid Oxide Fuel Cell Based on Dense Electrolyte Membrane Fabricated by Filter-Coating

Slip Casting Combined with Colloidal Spray Coating in Fabrication of Tubular Anode-Supported Solid Oxide Fuel Cells

Solid oxide electrolyzer positive electrodes with novel microstructure show unprecedented stability at high current densities

Improved Electrodes/Electrolyte Interfaces for Solid Oxide Fuel Cell by Using Dual‐Sized Powders in Electrolyte Slurry