Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

Layer interface characteristics and adhesion of 3D printed cement-based materials exposed to post-printing temperature disturbance

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Interlayer Adhesion Strength of 3D-Printed Cement-Based Materials Exposed to Varying Curing Conditions

Effect of Hydration Process on the Interlayer Bond Tensile Mechanical Properties of Ultra-High Performance Concrete for 3D Printing

Effect of Printing Parameters on Interlayer Bond Strength of 3D Printed Limestone-Calcined Clay-Based Cementitious Materials: an Experimental and Numerical Study

Effects of Temperature and Moisture on Concrete-PCM Interface Performance

Investigation on Concrete-Pcm Interface under Elevated Temperature: at Material Level and Member Level

Interface Bonding Characteristics of 3d Printed Ultra-High Performance Concrete after Elevated Temperatures

Effect of polyacrylamide on the workability and interlayer interface properties of 3D printed cementitious materials

Layer-interface Properties in 3D Printed Concrete: Dual Hierarchical Structure and Micromechanical Characterization

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Interlayer Bonding Improvement of 3D Printed Concrete with Polymer Modified Mortar: Experiments and Molecular Dynamics Studies

Interlayer Adhesion of 3D Printed Concrete: Influence of Layer Stacked Vertically

Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar

Correlation of Interlayer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals

Interlayer Bonding Performance of 3D Printed Engineered Cementitious Composites (ECC): Rheological Regulation and Fiber Hybridization

Improving bonding performance of PCM-concrete interface under elevated temperatures by using different adhesives

Effect of Pore Structure on Durability and Mechanical Performance of 3D Printed Concrete

Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene Fiber and Recycled Sand at Elevated Temperatures

Interlayer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites (ECC)