Abstract:In order to study the synergistic effects of organic and inorganic thickening agents on the rheological properties of cement paste, the rheological parameters, thixotropy cement-paste containing limestone powder (LP), re-dispersible polymer powder (RPP), and hydroxypropyl methylcellulose ether (HPMC) were investigated using the Anton Paar MCR 102 rheometer at different resting times. The early-age hydration process, hydration products, and microstructure were also analyzed with scanning electron microscopy (SEM) and thermogravimetry analyses (TGA). The results showed that the addition of LP, RPP, and HPMC affected the rheological properties of cement paste, but the thickening mechanism between organic and inorganic thickening agents was different. The small amount of LP increased the plastic viscosity but decreased the yield stress of cement paste due to its dense filling effect. Adding 1% of RPP improved the thixotropic property of cement paste by 50%; prolonging the standing time could improve the thixotropic performance by as much as two times. Only 0.035% HPMC added to the cement paste increased the plastic viscosity by 20%, while the yield stress increased nearly twice. The more HPMC added, the more significant effect it showed. Cement paste compounds with LP, RPP, and HPMC balanced the yield stress and plastic viscosity and improved the thixotropy. The C-L6-R1.0-H0.035 paste presented as a pseudoplastic, its rheological indexes were close to one, and it was hardly affected by the resting time. The composite superposition effect of organic and inorganic thickening agents reduced the impact of resting time for all pastes. As the organic thickening component inhibited the hydration more than the LP promoted the hydration of the cement paste, indicating that the C-L6-R1.0-H0.035 paste remained in the particle fusion stage after curing for three days, as shown by the SEM images.

Interlayer bonding investigation of 3D printing cementitious materials with fluidity retaining polycarboxylate superplasticizer and high dispersion polycarboxylate superplasticizer

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete

A novel method for improving the printability of cement-based materials: Controlling the releasing of capsules containing chemical admixtures

Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers

Preparation Of Amphoteric Polycarboxylate Superplasticizers And Their Performances In Cementitious System

Influence of Pentaerythritol Tetraacrylate Crosslinker on Polycarboxylate Superplasticizer Performance in Cementitious System

Effects of fiber volume fraction, fiber length, water-binder ratio, and nanoclay addition on the 3D printability of strain-hardening cementitious composites (SHCC)

Mechanism and Temperature Sensitivity of Slow Releasing Polycarboxylate Superplasticizer by Copolymerizing Acrylate Monomers

The interfacial characteristic of steel fiber reinforced polymer cement composites

Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

Mechanical properties, durability performance and interlayer adhesion of 3DPC mixtures: A state‐of‐the‐art review

Rheological Properties and Early-Age Microstructure of Cement Pastes with Limestone Powder, Redispersible Polymer Powder and Cellulose Ether

Study of 3D printed concrete with low-carbon cementitious materials based on its rheological properties and mechanical performances

Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers

Mix Design and 3D Printing Correlation Performance of Pcc-Based 3DPM

Study on the Synthesis and Rheological Properties of Polycarboxylate Superplasticizer with Different Main Link Density

Influence of HPMC and SF on buildability of 3D printing foam concrete: From water state and flocculation point of view

Effects of Comb-Shaped Superplasticizers with Different Charge Characteristics on the Microstructure and Properties of Fresh Cement Pastes

Effect of Alkali Content in Cement on the Fluidity and Structural Build-Up of Plasticized Cement Pastes