Abstract:Multi-layer crystallization and uncontrollable defects were the main factors that limiting the quality of Cu 2 ZnSn(S,Se) 4 (CZTSSe) films. Here a hybrid crystallization strategy was proposed to simultaneously improve the morphology and defect properties of CZTSSe film. Firstly, we found the variation of the microstructures (constitution, chemical environment of the elements, etc.) in precursor films can greatly alter the grain-growths of CZTSSe films. Detailed characterizations revealed that the chemical environment of S in the precursor film may influence the S-to-Se substitution of the film during the selenization process. This can further affect the grain-growth mechanism and the properties of CZTSSe film. While the S-to-Se substitution of the film mainly occurred below 500°C, the NaSe x on the surface of the film could dominate the grain-growth (Na-mechanism). For this mechanism, the CZTSSe film exhibited bi-layer morphology and relatively high band-tail energy, but shallow-acceptor was detected in the film. The solar cells based on the CZTSSe films reached the efficiency of 10.6%. As a comparison, liquid phase could be generated when the S-to-Se substitution of the film shifted to higher temperature (>500°C). In this condition, the grain-growth would be dominated by the liquid phase (LP-mechanism). Such mechanism can eliminate the multi-layer crystallization and reduce the band-tail energy, but the surface properties of the CZTSSe film was deteriorated and the formation of shallow-acceptor in CZTSSe was inhibited. The fabricated solar cells achieved the efficiency of 10.3%. Based on the results above, a bi-layer precursor film contained sub-layers with different microstructures was proposed to regulate the crystallization of CZTSSe. The co-existence of different microstructures in the precursor film could induce a hybrid grain-growth mechanism for the CZTSSe film (e.g., the Na-mechanism worked on the surface while the LP-mechanism worked in the bottom simultaneously). Such grain-growth mechanism can yield CZTSSe film with uniform morphology and favorable defect properties. The CZTSSe solar cells based on the hybrid grain-growth mechanism achieved the best efficiency of 12.6%. The investigation in this paper would provide new solutions for the crystallization regulation on CZTSSe photovoltaic material.

Preparation and Growth Mechanism of Pyramid‐Shaped Cu2ZnSnS4 Monocrystal and the Simulation of Its Monograin Layer Solar Cells

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Optimized grain growth for efficient solution-processed Bi-doped Cu2ZnSn(S,Se)4 thin film solar cells via spin-coated layers adjustment and two-step selenization

Large-Grain Spanning Monolayer Cu2 ZnSnSe4 Thin-Film Solar Cells Grown from Metal Precursor

Crystal Structure and Defect Reactions in the Kesterite Solar Cell Absorber Cu[sub 2]znsns[sub 4] (CZTS): Theoretical Insights

Cu2ZnSnS4 monograin layer solar cells for flexible photovoltaic applications

The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber

Opto-electronic properties and solar cell efficiency modelling of Cu$_2$ZnXS$_4$ (X=Sn,Ge,Si) kesterites

Synergistic Crystallization Modulation and Defects Passivation in Kesterite via Anion-Coordinate Precursor Engineering for Efficient Solar Cells

All-Layer Sputtering-Free Cu2Zn1-xCdxSnS4 Solar Cell with Efficiency Exceeding 7.5%

Regulating Hetero‐Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Growth Mechanism and Properties of Nanostructure Cu 2 ZnSnSe 4 Thin Films and Solar Cells

Pyramid‐Shaped Perovskite Single‐Crystal Growth and Application for High‐Performance Photodetector

Design and simulation of a new kesterite solar cell structure with and without a perovskite Back Surface Field layer to exceed 32% efficiency

Passivating Grain Boundaries via Graphene Additive for Efficient Kesterite Solar Cells

Self-Assembled 3D-Hierarchical Structure Cu2znsns4 Photocathodes by Tuning Anion Ratios in Precursor Solution

Thin-film CZTSSe solar cells efficiency improvement through BSF SnS layer and concentrator applications

Simultaneously improving the morphology and defect properties of CZTSSe film via hybrid grain-growth mechanism

Towards a high efficient Cd-free double CZTS layers kesterite solar cell using an optimized interface band alignment

Simulation and numerical modeling of high‐efficiency CZTS solar cells with a BSF layer

Wurtzite CZTS nanocrystals and phase evolution to kesterite thin film for solar energy harvesting