Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

A simple stress field solution for conical indentation

Elasticity Solutions of Spherically Isotropic Cones under Concentrated Loads at Apex

Elasticity Solutions for a Piezoelectric Cone under Concentrated Loads at Its Apex

An analytical expression for the stress field around an elastoplastic indentation/contact

Analytical solution to cavity expansion in linear softening soil

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

On the equilibrium of piezoelectric bodies of revolution

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Theoretical solutions for 2D mode-I crack-tip stress fields in power-law plastic materials based on the stress factor derived from the developed median-energy-density equivalence method

A Quantitative Analysis for the Stress Field Around an Elastoplastic Indentation/contact

Expansion of Spherical Cavity of Strain-Softening Materials with Different Elastic Moduli of Tension and Compression

Determining plastic properties of a material with residual stress by using conical indentation

Semi-analytical expressions to describe stress fields near the tip of Mode-I crack under plane-strain conditions

Pressure-controlled Elliptical Cavity Expansion under Anisotropic Initial Stress: Elastic Solution and Its Application

An elastic-plastic indentation model for different geometric indenters and its applications

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials

An Approximate Solution of the Spherical Indentation on a Generally Anisotropic Elastic Half-Space

Simplified method to identify full von Mises stress-strain curve of structural metals

The Stress Concentration in Finite-Size Plates Containing Elliptical Holes with a Direct Solution of Complex Series

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously