Abstract:In this article, an interference digital testing method for measuring spatial density distribution of transmissive objects is presented. This method applies a radial shearing interferometer to test the density field from 8 projections in the same plane. By taking advantage of the regularized phase-tracking technique (RPT), the single interferogram will be demodulated to two-dimensional phase distribution of the corresponding projection beam. Then the phase data on one given cross-section of every projection is selected to form 8 curves, which describe one-dimensional phase variation on the given cross-section from each projection. Regarding these curves as computer tomography projection data, the refractive index distribution of the given cross-section can be reconstructed utilizing the algebraic reconstruction technique (ART). Thus, a three-dimensional distribution of refractive index can be obtained by applying the method above to different cross-sections in order. Finally, we are capable of calculating the spatial density distribution with the relation between density and refractive index of the substance tested. In addition, the density field testing for hypersonic flow field is investigated as an example in this article. Considering the fact that the target model in the optical window center of a wind tunnel will inevitably block some testing beams, which will lead to the sharp decline in accuracy of the testing results, a modified algebraic reconstruction technique which improves accuracy by introducing biharmonic spline interpolation is presented. In simulation, an error less than 3% in non-block situation is reached while an error less than 8% in small-area-block situation is also obtained.

Density field measurement deflectometry for supersonic wind tunnels

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Advancements in Tunable Diode Laser Absorption Spectroscopy for Hypersonic Wind Tunnel Testing

Field Measurement System Based on a Wireless Sensor Network for the Wind Load on Spatial Structures: Design, Experimental, and Field Validation

Measurement and Diagnosis of the Wake Electron Density in High-Enthalpy Wind Tunnel

Measurement of the Electron Density of a Wind-Tunnel Plasma Using a Double Flush-Mounted Probe

Measurements of Asymmetric Complex Density Distribution in Supersonic Wind Tunnel by Moiré Tomography

Quantitative focused laser differential interferometry with hypersonic turbulent boundary layers

Simulation of wind-temperature-density measurement in near space by spaceborne Fe resonance fluorescence Doppler lidar

A Spectral-Domain Low-Coherence Method for Measuring Composite Windshield Thickness

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Simultaneous Density and Velocity Measurements in a Supersonic Turbulent Boundary Layer

Differential-pressure Fiber-Optic Airflow Sensor for Wind Tunnel Testing.

Two-Dimensional Wind Field Measurement Based on Lidar Signal Correlation

Measurement on Electron Density of High-Power and Large-Volume ICP-heated Wind Tunnel with HCN Laser Interferometer

3D Measurement of Large Deformations on a Tensile Structure during Wind Tunnel Tests Using Microsoft Kinect V2

Research on Reconstruction of Spatial Density Distribution Using Optical Interferometry and Tomography

Measurement technology in hypersonic wind tunnel

Beam Scanning and Wind Field Measurement of Direct-Detection Doppler Lidar

Combined free-stream disturbance measurements and receptivity studies in hypersonic wind tunnels by means of a slender wedge probe and DNS