Abstract:Due to the influence of tensile residual stress and pores, the fatigue resistance of titanium alloy fabricated by laser melting deposition (LMD) still needs to be improved. In this study, ultrasonic shot peening (USP) was utilized to strengthen the TA15 titanium alloy manufactured by LMD. The surface topography, microstructure, micro -hardness, residual stress and fatigue behavior were analyzed. After USP treatment, the root-mean-square devi-ation of the three-dimensional profile (Sq) and the local stress concentration factor (Kst) increased. High-density dislocations (dislocation tangles, dislocation walls, dislocation cells) and deformation twins were generated on the specimen subsurface. The existence of high-density dislocations improved the surface microhardness. Meanwhile, changes in microstructure affected the state and distribution of residual stress. The surface tensile residual stress was completely transformed into compressive residual stress. The fatigue behavior was signifi-cantly influenced. Under 720 MPa and 760 MPa stress levels, the safe fatigue life (reliability R = 0.95, confidence level C = 0.95) of TA15 titanium alloy manufactured by LMD increased by 200 % and 43 %, respectively. In the pore-profile valley competition, the pore showed greater fatigue sensitivity. The high-density dislocations and compressive residual stress accounted for the improvement in fatigue life. The high-density dislocations hindered the crack nucleation and short crack propagation at pores near the surface. The compressive residual stress reduced the crack propagation rate in the stable crack propagation stage. The results indicated USP as an effective method to improve the fatigue performance of the TA15 titanium alloy manufactured by LMD.

High-cycle bending fatigue behavior of TC6 titanium alloy subjected to laser shock peening assisted by cryogenic temperature

Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening

Improving high cycle fatigue performance of gas tungsten arc welded Ti6Al4V titanium alloy by warm laser shock peening

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Understanding the Relations between Surface Stress State and Microstructure Feature for Enhancing the Fatigue Performance of TC6 Titanium Alloy

Experimental and Numerical Studies of Fatigue Behavior of Ti6Al4V Alloy Treated by Laser Shock Peening

Surface residual stress, micro-hardness and geometry of TC6 titanium alloy thin-wall parts processed by multiple oblique laser shock peening

The effect of laser shock peening on very high cycle fatigue properties of laser welded 2A60 aluminum alloy joints

Effect of Warm Laser Shock Peening on the Low-Cycle Fatigue Behavior of DD6 Nickel-Based Single-Crystal Superalloy

Effect of Surface Roughness and Compressive Residual Stress on the Fatigue Performance of TC4 Titanium Alloy Subjected to Laser Shock Wave Planishing

Effects of laser shock peening on fatigue crack growth rate and fracture properties of AA2524 aluminum alloy

Effects of Ultrasonic Shot Peening on Fatigue Behavior of TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Combined tensile and bending fatigue behavior and failure mechanism of a blade-like specimen at elevated temperature

Molecular dynamics simulation of microstructural evolution and mechanical behavior of titanium alloy subjected to laser shock peening

Effect of fretting wear on TC4 alloy prepared by laser shock peening at high temperature

Development of In Situ Fatigue Performance Testing Apparatus for Materials Under Coupling Conditions of High-Temperature and Combined Mechanical Loads

Effect of laser shock peening without protective coating on surface integrity of titanium-based carbon-fibre/epoxy laminates

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

Gradient microstructure and foreign-object-damaged fatigue properties of Ti6Al4V titanium alloy processed by the laser shock peening and subsequent shot peening

Microstructure and fatigue properties of TC4 titanium alloy treated by α+β forging process

The Effect of Microstructure and Axial Tension on Three-Point Bending Fatigue Behavior of TC4 in High Cycle and Very High Cycle Regimes