Abstract:In this paper, the main purpose was to investigate the effects of laser peening (LP) on the microstructural evolution and frictional wear resistance of TC6 titanium alloy. The surface topographic features, microhardness and residual stress distribution in the depth direction of differently treated specimens were measured using three-dimensional topography instrument, digital microhardness tester and residual stress instrument. The frictional wear test was carried out using a multifunctional friction wear tester. Meanwhile, X-ray diffraction (XRD), optical microscope (OM) and transmission electron microscopy (TEM) were utilized to investigate the effects of LP on the microstructural response of TC6 titanium alloy. The results indicated that the micro-pits induced by LP increased the surface roughness to a maximum of 6.94 μm. LP technique effectively improved the microhardness and frictional wear resistance of TC6 titanium alloy, and the wear form changed from abrasive wear, adhesive wear and fatigue spalling wear to abrasive wear at the laser energy of 8 J. Compared to the untreated specimens, the surface microhardness of the specimens treated by LP with 8 J increased from 356 HV to 442 HV, and the affected layer depth was approximately 500 μm. Moreover, the friction coefficient decreased from 1.2 to 0.5, the abrasion depth of the abrasion track was reduced by approximately 32 % compared to the untreated specimen. Additionally, the surface compressive residual stress induced by LP with 8 J reached about −510 MPa. The microstructural evolution of the specimens processed by LP was dominated by twin formation and dislocation slip, while the intercalation between multidirectional twins and the formation of sub-grain boundaries promoted grain refinement of TC6 titanium alloy. Refined grains, high density of dislocations, mechanical twins and the implantation of compressive residual stresses effectively improved the friction and wear resistance of TC6 titanium alloy.

Effect of laser shock peening without protective coating on surface integrity of titanium-based carbon-fibre/epoxy laminates

Improving fatigue initiation life of open-hole fibre metal laminates by laser shock peening

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Effect of laser shock peening on microstructure and mechanical properties of laser cladding 30CrMnSiNi2A high-strength steel

Effect of Laser Shock Peening on Stress Corrosion Cracking of TC4/2A14 Dissimilar Metal Friction Stir Welding Joints

Effects of Laser Shock Peening on Microstructure and Properties of Ti–6Al–4V Titanium Alloy Fabricated via Selective Laser Melting

Microstructural response and surface mechanical properties of TC6 titanium alloy subjected to laser peening with different laser energy

The Influence of Absorbing Coating Material on the Efficiency of Laser Shock Peening

Experimental and theoretical study on residual ultimate strength after impact of CF/PEEK-titanium hybrid laminates with nano-interfacial enhancement

Effects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy

Fabrication of TiN Coatings Deposited on Laser Shock Micro-Textured Substrates for Improving the Interface Adhesion Properties of Coatings

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium

Effect of TiN/Ti coating combined with laser shock peening pre-treatment on the fatigue strength of Ti-6Al-4V titanium alloy

Laser shock processing of titanium alloys: a critical review on the microstructure evolution and enhanced engineering performance

Laser Shock Peening of SiCp/2009Al Composites: Microstructural Evolution, Residual Stress and Fatigue Behavior

Effect of the Absorption Layer on the Microstructure and Mechanical Properties of M50 Steel by Laser Shock Peening

Effect of layer-wise femtosecond laser shock peening on cracking growth in laser powder bed fused AA 7075

Mechanical properties and strengthening mechanisms of Ti-6Al-4V treated by electro-pulsing assisted laser shock peening