Abstract:Due to the influence of tensile residual stress and pores, the fatigue resistance of titanium alloy fabricated by laser melting deposition (LMD) still needs to be improved. In this study, ultrasonic shot peening (USP) was utilized to strengthen the TA15 titanium alloy manufactured by LMD. The surface topography, microstructure, micro -hardness, residual stress and fatigue behavior were analyzed. After USP treatment, the root-mean-square devi-ation of the three-dimensional profile (Sq) and the local stress concentration factor (Kst) increased. High-density dislocations (dislocation tangles, dislocation walls, dislocation cells) and deformation twins were generated on the specimen subsurface. The existence of high-density dislocations improved the surface microhardness. Meanwhile, changes in microstructure affected the state and distribution of residual stress. The surface tensile residual stress was completely transformed into compressive residual stress. The fatigue behavior was signifi-cantly influenced. Under 720 MPa and 760 MPa stress levels, the safe fatigue life (reliability R = 0.95, confidence level C = 0.95) of TA15 titanium alloy manufactured by LMD increased by 200 % and 43 %, respectively. In the pore-profile valley competition, the pore showed greater fatigue sensitivity. The high-density dislocations and compressive residual stress accounted for the improvement in fatigue life. The high-density dislocations hindered the crack nucleation and short crack propagation at pores near the surface. The compressive residual stress reduced the crack propagation rate in the stable crack propagation stage. The results indicated USP as an effective method to improve the fatigue performance of the TA15 titanium alloy manufactured by LMD.

Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening

Experimental and Numerical Studies of Fatigue Behavior of Ti6Al4V Alloy Treated by Laser Shock Peening

Gradient microstructure and foreign-object-damaged fatigue properties of Ti6Al4V titanium alloy processed by the laser shock peening and subsequent shot peening

High-cycle bending fatigue behavior of TC6 titanium alloy subjected to laser shock peening assisted by cryogenic temperature

The effect of laser shock peening on very high cycle fatigue properties of laser welded 2A60 aluminum alloy joints

Optimization of multiple laser shock peening on high-cycle fatigue performance of aluminized AISI 321 stainless steel

Improving high cycle fatigue performance of gas tungsten arc welded Ti6Al4V titanium alloy by warm laser shock peening

Effects of Ultrasonic Shot Peening on Fatigue Behavior of TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Influence Of Laser Shock Peening On Low- And High-Cycle Fatigue Of An Ot4-0 Titanium Alloy

Effect of laser shock peening on high cycle fatigue properties of aluminized AISI 321 stainless steel

Plastic deformation behavior of titanium alloy by warm laser shock peening: Microstructure evolution and mechanical properties

Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc

Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

Understanding the Relations between Surface Stress State and Microstructure Feature for Enhancing the Fatigue Performance of TC6 Titanium Alloy

Enhanced fatigue strength of 2A02 aluminum alloy via micro laser shock peening

The Effect of Laser Shock Peening (LSP) on the Surface Roughness and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Alloy

Formation Mechanism and Control Method of Residual Stress Profile by Laser Shock Peening in Thin Titanium Alloy Component