Abstract:Ti2AlNb-based alloys are developed from conventional titanium aluminides (TiAl-based alloys and Ti3Al-based alloys). Comparing with TiAl and Ti3Al-based alloys, Ti2AlNb-based alloys have better mechanical properties of strength density ratio, high temperature fracture toughness and creep resistance. It is expected to replace traditional high temperature materials such as nickel-based alloys for the manufacture of aero-engine components. Laser shock peening (LSP) is an advanced surface modification technology which induces high amplitude, large depth residual compressive stress on the surface of materials. It can effectively enhance mechanical properties of material such as micro-hardness, fatigue resistance, high temperature oxidation performance. Compared to other surface modification technologies such as shot peening and rolling, LSP can not only induce deeper compress residual stress (1-2 mm), which is about five to ten times dwms than that of shot peening, but it can refine the grain or even form nanocrystals which plays a significant role in enhancing properties of material. For these reasons, this surface treatment technology has been widely used in the aircraft and nuclear energy industries. In this paper, the surface modification of Ti2AlNb alloy was carried out by laser shock peening, and the microstructure evolution, residual stress and the performance at high temperature were investigated. The results show that laser shock peening can significantly reduce the grain size of the surface of Ti2AlNb alloy. Dislocation lines, dislocation tangles and dislocation walls were generated after LSP. The micro-hardness is increased from 350 ITV to 395 HV and the effect layer is about 1.2 mm. The residual compressive stress of -337 MPa is generated on the surface of the sample. In addition, residual stress is released obviously at high temperature. The residual stress on the surface of sample reduces to -65 MPa after heat treatment at 720 degrees C for 4 h. The residual stress is almost completely released after heat treatment at 720 degrees C for 10 h. However, the release rate of residual stress is slowed down at 600 degrees C. The effect of laser shock peening is still presence after heat treatment for 100 h.

Plastic deformation behavior of titanium alloy by warm laser shock peening: Microstructure evolution and mechanical properties

Effect of Process Temperature on Mechanical Properties of Ti6Al4V Titanium Alloy with Warm Laser Shock Peening

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Molecular dynamics simulation of microstructural evolution and mechanical behavior of titanium alloy subjected to laser shock peening

Effect of Laser Shock Peening on Microstructure and Tensile Properties of TC17 Titanium Alloy

Atomistic Insight into Laser Shock Peening Response of Α-Titanium: an Experimentally Verified Simulation Study

Vibration fatigue performance and strengthening mechanism of TC6 titanium alloy by laser shock peening

Laser Shock Peening of Laser Additive Manufactured Ti6Al4V Titanium Alloy

Effects on structure and mechanical properties of TC11 titanium alloy by laser shock peening

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium

Influence Of Laser Shock Peening On Microstructure And Oxidation Resistance Of Laser Additive Manufactured Tc4 Titanium Alloy

Effect of Laser Shock Peening on Residual Stress and Microstructure of TC17 Titanium Alloy

Effect of Laser Shock Processing on Residual Stress and Microstructure of Ti834 Titanium Alloy

Laser shock processing of titanium alloys: a critical review on the microstructure evolution and enhanced engineering performance

Microstructure and High-Temperature Tribological Properties of Ti–6Al–4V Alloy Treated by Laser Shock Peening

Effect of Laser Shock Peening on Microstructure and Residual Stress of Ti2AlNb Alloy

Effects of Laser Shock Peening on Microstructure and Properties of Ti–6Al–4V Titanium Alloy Fabricated via Selective Laser Melting

Effect of dynamic recrystallization on texture orientation and grain refinement of Ti6Al4V titanium alloy subjected to laser shock peening

Laser shock peened Ti-6Al-4 V alloy: Experiments and modeling

Microstructural Evolution and Surface Mechanical Properties of the Titanium Alloy Ti-13Nb-13Zr Subjected to Laser Shock Processing

Effects of Laser Shock Peening on Microstructure and Mechanical Properties of TC17 Titanium Alloy