Abstract:ZnS is a promising sorbent in recovering Hg0 from industrial flue gas due to its excellent Hg0 adsorption capacity. However, the internal structure–activity relationship still needs to be further clarified. In this work, ZnS sorbents with different structures were synthesized with the hydrothermal method by tuning the temperature. The samples had significant differences in the crystallinity, morphology, particle size, and sulfur (S) active sites. The results indicated that Hg0 removal performance was determined by the specific surface area and S active sites. ZnS synthesized at low temperatures (80-ZnS and 120-ZnS) had a larger surface area, while the S sites on the high-temperature-synthesized sample (160-ZnS) were more active for Hg0 adsorption. The 160-ZnS sample exhibited a much higher Hg0 adsorption amount per unit surface area. Further characterization revealed that S22– and Sx were the main active sites for Hg0 adsorption. Sx existed in the form of long-chain polysulfur (L-Sx) on 80-ZnS and 120-ZnS, while it exhibited in the form of short-chain polysulfur (S-Sx) on 160-ZnS. L-Sx had negligible adsorption ability, while S-Sx had a high affinity for Hg0. Hg0 can react with S22– and S-Sx, forming α-HgS and β-HgS, respectively. The new insight in this work can provide theoretical guidance for the design and structure optimization of ZnS, facilitating its practical industrial application.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05878?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05878</a>.Additional experimental data of sample characterization (Figures S1, S3, and S4); schematic diagram of the fixed-bed experimental system (Figure S2); breakthrough profile of 80-ZnS for long-time adsorption (Figure S5); influence of flue gas components on 80-ZnS (Figure S6); Hg-TPD peak fitting (Figure S7); comparison of 80-ZnS with other adsorbents for Hg0 capture (Table S1); summary of the active sites and corresponding products from the references (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05878/suppl_file/es0c05878_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hierarchical microsphere Flower-like SnIn4S8 with active sulfur sites for adsorption and removal of mercury from coal-fired flue gas

Graphene-like MoS2 containing adsorbents for Hg0 capture at coal-fired power plants

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Integrated Dynamic and Steady State Method and Its Application on the Screening of MoS2 Nanosheet-Containing Adsorbents for Hg-0 Capture

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Nanosized Cu-In spinel-type sulfides as efficient sorbents for elemental mercury removal from flue gas

Engineering sulfur-rich MoS 2 adsorbent with abundant unsaturated coordination sulfur sites for gaseous mercury capture from high-concentration SO 2 smelting flue gas

Selenium ligands doped ZnS for highly efficient immobilization of elemental mercury from coal combustion flue gas

Copper sulfide microsphere for Hg0 capture from flue gas at low temperature

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

In-situ low-temperature sulfur CVD on metal sulfides with SO2 to realize self-sustained adsorption of mercury

Different Crystal Forms of ZnS Nanomaterials for the Adsorption of Elemental Mercury

Achieving Large-Capability Adsorption of Hg0 in Wet Scrubbing by Defect-Rich Colloidal Copper Sulfides under High-SO2 Atmosphere

Electrostatically directed assembly of macroporous skeleton structured copper selenide for elemental mercury sequestration from coal-fired flue gas

Promoting elemental mercury immobilization performance from smelting flue gas over a wide temperature range via cobalt-doped copper sulfide adsorbents

Fabrication of Novel Nanosulfur-Modified Activated Carbon Adsorbent for Elemental Mercury Removal from Flue Gas

Controlled synthesis of CuS with different morphology and pollution control of Hg 0 in non-ferrous smelting flue gas

Elution of Hg-containing Substances from CeO2-MnO2/TiO2 Adsorbent in H2S Atmosphere by CuCl2 Solution

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas

Nanosized Zn–In Spinel-Type Sorbents for Elemental Mercury Removal from Flue Gas