Abstract:Gaseous elemental mercury (Hg 0 ) removal is desirable for the green and high-quality development of nonferrous metal smelting industry. Developing a simple and feasible method to prepare high-performance adsorbent is still challenging. Herein, a sulfur enrichment strategy was proposed to prepare molybdenum sulfide (MoS x ) with abundant unsaturated coordination sulfur sites. Benefiting the sulfur-rich feature, the Hg 0 sequestration capacity of prepared MoS x is markedly enhanced compared with commercial MoS 2 . The characterization results of MoS x demonstrate an ideal structural property and abundant unsaturated sulfur ligands, which assures a desired performance for Hg 0 adsorption. Among these adsorbents, MoS x -6–220 exhibits the best Hg 0 capture performance, which presents a Hg 0 adsorption efficiency of nearly 100 % and average adsorption rate of 6.41 μg/g/min. The theoretical saturated adsorption capacity of MoS x -6–220 reaches 53.03 mg/g, higher than other conventional metal sulfides. The typical compositions in the smelting flue gas have almost little impact on Hg 0 adsorption. The experimental and characterization results confirm that the impressive performance is primarily attributed to the enormous quantity of unsaturated coordination sulfur sites, rather than S/Mo stoichiometry . Moreover, the density functional theory calculation results further demonstrate the high adsorption activity of unsaturated coordination sulfur site for Hg 0 immobilization. Hg 0 adsorption pathway shows that Hg 0 is first adsorbed on the top of Mo atom in the form of Hg-Mo amalgam, then the adsorbed Hg would migrate to unsaturated coordination sulfur ligand and bond with it to form stable HgS product, thereby realizing the permanent immobilization of Hg 0 . This work not only provide a promising strategy to prepare high-performance metal sulfide adsorbents, but also give deep insight into the Hg 0 adsorption and conversion mechanism at the molecular level.

Graphene-like MoS2 containing adsorbents for Hg0 capture at coal-fired power plants

Hg(0) Capture over CoMoS/γ-Al2O3 with MoS2 Nanosheets at Low Temperatures.

Microwave-induced Activation of Additional Active Edge Sites on the MoS2 Surface for Enhanced Hg0 Capture

Integrated Dynamic and Steady State Method and Its Application on the Screening of MoS2 Nanosheet-Containing Adsorbents for Hg-0 Capture

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Recent advances in MnO<sub>2</sub>-based adsorbents for mercury removal from coal-fired flue gas

Mechanistic investigation on the Hg 0 elimination ability of MnO x –CeO x nanorod adsorbents: effects of Mn/Ce molar ratio

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Structural Defects in 2D MoS2 Nanosheets and Their Roles in the Adsorption of Airborne Elemental Mercury

MoO3-adjusted Δ-Mno2 Nanosheet for Catalytic Oxidation of Hg0 to Hg2+

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Engineering sulfur-rich MoS 2 adsorbent with abundant unsaturated coordination sulfur sites for gaseous mercury capture from high-concentration SO 2 smelting flue gas

Recovery of Elemental Mercury from Coal-derived Flue Gas Using a MoS2-based Material

Effective removal of mercury from flue gas using flower-like MoS2 doped with rod-shaped MnO2

Hg 0 Capture over MoS 2 Nanosheets Containing Adsorbent: Effects of Temperature, Space Velocity, and Other Gas Species

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas

Hg-0 Capture Over Comos/Gamma-Al2o3 With Mos2 Nanosheets At Low Temperatures

The Performance and Kinetics of Flower-Like MoS2 for Hg2+ Removal from Acidic Wastewater

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas