Abstract:Gaseous elemental mercury (Hg 0 ) removal is desirable for the green and high-quality development of nonferrous metal smelting industry. Developing a simple and feasible method to prepare high-performance adsorbent is still challenging. Herein, a sulfur enrichment strategy was proposed to prepare molybdenum sulfide (MoS x ) with abundant unsaturated coordination sulfur sites. Benefiting the sulfur-rich feature, the Hg 0 sequestration capacity of prepared MoS x is markedly enhanced compared with commercial MoS 2 . The characterization results of MoS x demonstrate an ideal structural property and abundant unsaturated sulfur ligands, which assures a desired performance for Hg 0 adsorption. Among these adsorbents, MoS x -6–220 exhibits the best Hg 0 capture performance, which presents a Hg 0 adsorption efficiency of nearly 100 % and average adsorption rate of 6.41 μg/g/min. The theoretical saturated adsorption capacity of MoS x -6–220 reaches 53.03 mg/g, higher than other conventional metal sulfides. The typical compositions in the smelting flue gas have almost little impact on Hg 0 adsorption. The experimental and characterization results confirm that the impressive performance is primarily attributed to the enormous quantity of unsaturated coordination sulfur sites, rather than S/Mo stoichiometry . Moreover, the density functional theory calculation results further demonstrate the high adsorption activity of unsaturated coordination sulfur site for Hg 0 immobilization. Hg 0 adsorption pathway shows that Hg 0 is first adsorbed on the top of Mo atom in the form of Hg-Mo amalgam, then the adsorbed Hg would migrate to unsaturated coordination sulfur ligand and bond with it to form stable HgS product, thereby realizing the permanent immobilization of Hg 0 . This work not only provide a promising strategy to prepare high-performance metal sulfide adsorbents, but also give deep insight into the Hg 0 adsorption and conversion mechanism at the molecular level.

Effective removal of mercury from flue gas using flower-like MoS2 doped with rod-shaped MnO2

Recent advances in MnO<sub>2</sub>-based adsorbents for mercury removal from coal-fired flue gas

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Graphene-like MoS2 containing adsorbents for Hg0 capture at coal-fired power plants

Mechanistic investigation on the Hg 0 elimination ability of MnO x –CeO x nanorod adsorbents: effects of Mn/Ce molar ratio

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Engineering sulfur-rich MoS 2 adsorbent with abundant unsaturated coordination sulfur sites for gaseous mercury capture from high-concentration SO 2 smelting flue gas

Mercury Removal Mechanism of AC Prepared by One-Step Activation with ZnCl2

Enhancing the Catalytic Oxidation of Elemental Mercury and Suppressing Sulfur-Toxic Adsorption Sites from SO2-containing Gas in Mn-SnS2.

Removal of elemental mercury from flue gas using the magnetic attapulgite by Mn-Cu oxides modification

Cubic SAPO-34 supported MnOx for low-temperature gaseous mercury oxidation and adsorption from coal-fired flue gas

Mercury removal from syngas by metal oxides based adsorbent: A review

[Mos4](2-) Cluster Bridges In Co-Fe Layered Double Hydroxides For Mercury Uptake From S-Hg Mixed Flue Gas

Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/Alumina

Hg0 chemisorption of magnetic manganese cobalt nano ferrite from simulated flue gas

Recovery of Elemental Mercury from Coal-derived Flue Gas Using a MoS2-based Material

Mercury removal from flue gas by a MoS2/H2O heterogeneous system based on its absorption kinetics