Abstract:ZnS is a promising sorbent in recovering Hg0 from industrial flue gas due to its excellent Hg0 adsorption capacity. However, the internal structure–activity relationship still needs to be further clarified. In this work, ZnS sorbents with different structures were synthesized with the hydrothermal method by tuning the temperature. The samples had significant differences in the crystallinity, morphology, particle size, and sulfur (S) active sites. The results indicated that Hg0 removal performance was determined by the specific surface area and S active sites. ZnS synthesized at low temperatures (80-ZnS and 120-ZnS) had a larger surface area, while the S sites on the high-temperature-synthesized sample (160-ZnS) were more active for Hg0 adsorption. The 160-ZnS sample exhibited a much higher Hg0 adsorption amount per unit surface area. Further characterization revealed that S22– and Sx were the main active sites for Hg0 adsorption. Sx existed in the form of long-chain polysulfur (L-Sx) on 80-ZnS and 120-ZnS, while it exhibited in the form of short-chain polysulfur (S-Sx) on 160-ZnS. L-Sx had negligible adsorption ability, while S-Sx had a high affinity for Hg0. Hg0 can react with S22– and S-Sx, forming α-HgS and β-HgS, respectively. The new insight in this work can provide theoretical guidance for the design and structure optimization of ZnS, facilitating its practical industrial application.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05878?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05878</a>.Additional experimental data of sample characterization (Figures S1, S3, and S4); schematic diagram of the fixed-bed experimental system (Figure S2); breakthrough profile of 80-ZnS for long-time adsorption (Figure S5); influence of flue gas components on 80-ZnS (Figure S6); Hg-TPD peak fitting (Figure S7); comparison of 80-ZnS with other adsorbents for Hg0 capture (Table S1); summary of the active sites and corresponding products from the references (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05878/suppl_file/es0c05878_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nanosized Zn–In Spinel-Type Sorbents for Elemental Mercury Removal from Flue Gas

Nanosized Cu-In spinel-type sulfides as efficient sorbents for elemental mercury removal from flue gas

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas.

AMn2O4 (a=cu, Ni and Zn) Sorbents Coupling High Adsorption and Regeneration Performance for Elemental Mercury Removal from Syngas.

Nanosized ZnIn2S4 Supported on Facet-Engineered CeO2 Nanorods for Efficient Gaseous Elemental Mercury Immobilization

Elemental Mercury Removal from Syngas by Nano-Zno Sorbent

Immobilization of elemental mercury in non-ferrous metal smelting gas using ZnSe1−xSx nanoparticles

Different Crystal Forms of ZnS Nanomaterials for the Adsorption of Elemental Mercury

Induced Synthesis of SO2-promoting and H2O-tolerant Sorbents for Elemental Mercury Removal from Flue Gas

Removal of Gas-Phase Elemental Mercury in Flue Gas by Inorganic Chemically Promoted Natural Mineral Sorbents

Effect of Nitrogen Oxides on Elemental Mercury Removal by Nanosized Mineral Sulfide

ect of Nitrogen Oxides on Elemental Mercury Removal by Nanosized Mineral Sul fi

Dual Roles of Nano-Sulfide in Efficient Removal of Elemental Mercury from Coal Combustion Flue Gas within a Wide Temperature Range.

Novel Regenerable Sorbent Based on Zr-Mn Binary Metal Oxides for Flue Gas Mercury Retention and Recovery

Novel metal sulfide sorbents for elemental mercury capture in flue gas: A review

Nanosized Cation-Deficient Fe-Ti Spinel: A Novel Magnetic Sorbent for Elemental Mercury Capture from Flue Gas

Development of CuInS2/g-C3N4 Nanolayer for Efficient Adsorption of Elemental Mercury from Coal Combustion Flue Gas

Nanosized Copper Selenide Functionalized Zeolitic Imidazolate Framework-8 (Cuse/Zif-8) For Efficient Immobilization Of Gas-Phase Elemental Mercury

Development of Copper Sulfide Functionalized CeO2 Nanoparticle for Strengthened Removal of Gaseous Elemental Mercury from Flue Gas

Experimental Study on Zno-Tio2 Sorbents for the Removal of Elemental Mercury

Study on the regenerable sulfur-resistant sorbent for mercury removal from nonferrous metal smelting flue gas