Abstract:Gaseous elemental mercury (Hg 0 ) removal is desirable for the green and high-quality development of nonferrous metal smelting industry. Developing a simple and feasible method to prepare high-performance adsorbent is still challenging. Herein, a sulfur enrichment strategy was proposed to prepare molybdenum sulfide (MoS x ) with abundant unsaturated coordination sulfur sites. Benefiting the sulfur-rich feature, the Hg 0 sequestration capacity of prepared MoS x is markedly enhanced compared with commercial MoS 2 . The characterization results of MoS x demonstrate an ideal structural property and abundant unsaturated sulfur ligands, which assures a desired performance for Hg 0 adsorption. Among these adsorbents, MoS x -6–220 exhibits the best Hg 0 capture performance, which presents a Hg 0 adsorption efficiency of nearly 100 % and average adsorption rate of 6.41 μg/g/min. The theoretical saturated adsorption capacity of MoS x -6–220 reaches 53.03 mg/g, higher than other conventional metal sulfides. The typical compositions in the smelting flue gas have almost little impact on Hg 0 adsorption. The experimental and characterization results confirm that the impressive performance is primarily attributed to the enormous quantity of unsaturated coordination sulfur sites, rather than S/Mo stoichiometry . Moreover, the density functional theory calculation results further demonstrate the high adsorption activity of unsaturated coordination sulfur site for Hg 0 immobilization. Hg 0 adsorption pathway shows that Hg 0 is first adsorbed on the top of Mo atom in the form of Hg-Mo amalgam, then the adsorbed Hg would migrate to unsaturated coordination sulfur ligand and bond with it to form stable HgS product, thereby realizing the permanent immobilization of Hg 0 . This work not only provide a promising strategy to prepare high-performance metal sulfide adsorbents, but also give deep insight into the Hg 0 adsorption and conversion mechanism at the molecular level.

Copper sulfide microsphere for Hg0 capture from flue gas at low temperature

Review of Elemental Mercury (hg0) Removal by CuO-based Materials

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Hg(0) Capture over CoMoS/γ-Al2O3 with MoS2 Nanosheets at Low Temperatures.

Nanosized Cu-In spinel-type sulfides as efficient sorbents for elemental mercury removal from flue gas

Integrated Dynamic and Steady State Method and Its Application on the Screening of MoS2 Nanosheet-Containing Adsorbents for Hg-0 Capture

Promoting elemental mercury immobilization performance from smelting flue gas over a wide temperature range via cobalt-doped copper sulfide adsorbents

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Controlled synthesis of CuS with different morphology and pollution control of Hg 0 in non-ferrous smelting flue gas

Synergy of Copper Vacancies and Amorphous Regions in Copper Sulfides Enables Superior Capacity for Hg0 Adsorption

Selenium ligands doped ZnS for highly efficient immobilization of elemental mercury from coal combustion flue gas

In-situ low-temperature sulfur CVD on metal sulfides with SO2 to realize self-sustained adsorption of mercury

Achieving Large-Capability Adsorption of Hg0 in Wet Scrubbing by Defect-Rich Colloidal Copper Sulfides under High-SO2 Atmosphere

Hierarchical microsphere Flower-like SnIn4S8 with active sulfur sites for adsorption and removal of mercury from coal-fired flue gas

Elemental Mercury Removal from Flue Gas over Silver-Loaded CuS-Wrapped Fe 3 O 4 Sorbent

Dual 2-dimensional CuSe/g-C3N4 nano-heterostructure for boosting immobilization of elemental mercury in flue gas

Engineering sulfur-rich MoS 2 adsorbent with abundant unsaturated coordination sulfur sites for gaseous mercury capture from high-concentration SO 2 smelting flue gas

Efficient Removal of Elemental Mercury from Coal-Fired Flue Gas over Sulfur-Containing Sorbent at Low Temperatures

High organic sulfur coal derived carbon-based sorbent for Hg 0 capture from coal-fired flue gas

New utilizations of natural CuFeS 2 as the raw material of Cu smelting for recovering Hg 0 from Cu smelting flue gas

Elution of Hg-containing Substances from CeO2-MnO2/TiO2 Adsorbent in H2S Atmosphere by CuCl2 Solution