Abstract:Ytterbium-doped photonic crystal fibers have been the major player in the extremely rapid increase of the output power of high power femtosecond fiber laser systems. However, rare earth doping of silica leads to an increased refractive index of the core, which is, in turn, compensated by other codopands. In the case of Very Large Mode Area (VLMA) Large Pitch photonic crystal Fibers (LPFs) for high power laser systems it is vital to obtain an ideal index-matching between the actively doped core region and the passive surrounding air hole structure. In [1] it was demonstrated that index-matching is most important for mode area scaling of core-pumped LPFs with effective single-mode operation through mode-discrimination. However, surrounding the core structure by a pump cladding leads to a completely new structure, where core and cladding modes can interact through anticrossings. In [2] it was shown that fundamental mode (FM) anticrossings can be avoided and higher order mode (HOM) anticrossings can be exploited by the proper choice of the airclad diameter. With growing airclad diameter, the effective index of a core guided mode basically remains constant while cladding modes posses growing effective indices and, thus, will cross the effective index of the core guided FM. However, some HOMs deform when their effective index approaches the FM index, the shape of both modes converge. Finally the former HOM takes over the role of the FM while the former FM is deformed.

LMA fibers with increased higher-order mode loss for high average power, pulsed, diffraction-limited lasers

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Higher-order modes expand optical fiber amplifier performance

Higher-order Mode Fiber Enables High Energy Chirped-Pulse Amplification.

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality

New progress of large mode area fibers

Anticrossings induced by index depressions and their impact on mode area scaling of active large pitch fibers

Partially inscribed Bragg gratings suppressing high-order modes in high-power large-mode-area fiber oscillators

Mode transmission performance study of a novel heterogeneous helical cladding fiber with an isolation ring

Adaptive Modal Gain Controlling for a High-Efficiency Cylindrical Vector Beam Fiber Laser

An optimized configuration of large mode field area PMMA photonic crystal fiber with low bending loss: a new approach

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

A low-loss photonic silica nanofiber for higher-order modes

Polymer-clad silica fibers for tailoring modal area and dispersion

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

Integration of an anti-resonant hollow-core fiber with a multimode Yb-doped fiber for high power near-diffraction-limited laser operation

High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

Laser beam shaping for enhanced Zero-Group Velocity Lamb modes generation

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance