Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. As a high-speed rotary type machinery, the hermetic rolling piston compressor has been widely used in household air conditioners. Due to the high quality of living standards, a low vibration characteristic becomes a key point of these white household appliances. To investigate the vibration characteristic of the compressor prototype, an experiment has been carried out and three measuring points at the compressor shell have been selected. Five acceleration sensors have been used to record the vibration accelerations in different directions at the three measuring points under the operation speed from 30 Hz to 90 Hz. Three factors including the type of connecting pipe, the vibration isolator, and the binding constraint have been considered to reduce the vibration acceleration. The experimental results show that the radial vibration acceleration of measuring point 1 and the axial vibration acceleration of measuring point 2 exceed 20 m·s−2 when the operation speed reaches 90 Hz and the connecting pipe is bent. Compared with the bent connecting pipe, the unbent connecting pipe has a significant effect on vibration mitigation. Both the vibration isolators and the binding constraint are helpful to reduce the vibration acceleration, however, the binding constraint and the vibration isolators cannot be used at the same time.

Effect of mounting bracket structure and material on automotive air conditioning compressor

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Fatigue life analysis of compressor bracket of car air conditioner

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

The Inner Acoustic Field Variety Due to the Effect of Refrigerator Compressor Oil Based on Finite Element Analysis

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Study on the Impact of Shock Absorber on Vibration and Noise of Air-conditioner's Outdoor Unit

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

The effect of dynamics of the swash plate–slippers–piston assembly on friction torques in bearings in compressor of cooling aggregate

Experimental investigation on the vibration characteristics of the compressor in the outdoor unit of a household air conditioner

An Investigation of the Acoustic Enclosure of an Air Conditioning Compressor Using Response Surface Analysis and Topological Rigidity Optimization

A Study of Vibrational Modal Characteristics of Commercial Vehicle Multi-rigid-body Powertrain with Mounting Systems

Acoustical Contribution Calculation and Analysis of Compressor Shell Based on Acoustic Transfer Vector Method

Performance Research and Optimization of Sound Insulation Hood of Air Compressor Unit

The optimal design of the mounting rubber system for reducing vibration of the air compressor focusing on complex dynamic stiffness

A Survey of Design Methods for Automotive Engine Mounting System

VIBRATION-ACOUSTICS STUDY OF R410A ROTARY COMPRESSORS

Finite Element Analysis of Engine Vibration Isolation Rubber Mount

Amelioration of Acoustic Performance of Two-cylinder Compressors by Using Single-pipe Suction Accumulator

Global sensitivity analysis of structural parameters for automobile air conditioning blower