Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Low-frequency radiated noise, characterized by a distinctive "acoustic fingerprint" is generated when vibrations from marine machinery propagate through a ship's hull into the ocean. This type of noise travels long distances with concentrated and stable energy, posing a significant threat to a ship's acoustic stealth capabilities. Active-passive hybrid isolation is the primary method for reducing low-frequency radiated noise from ships; however, technical challenges remain, such as effectively integrating active and passive components, achieving high output force in a compact design, and addressing the poor linearity of actuator output at low frequencies. To address these issues, this paper presented an innovative electromagnetic-hydraulic-rubber integrated vibration isolator. Firstly, the study analyzed the dynamic characteristics of a two-degree-of-freedom isolation system and investigated the influence of active-passive hybrid vibration isolator parameters on control force and vibration reduction performance. Secondly, it was established that the magnetic circuit model and magnetic field strength expressions for the electromagnetic actuator using magnetic circuit analysis derive the analytical relationship between electromagnetic force, current amplitude, and frequency using the energy method. Subsequently, a mathematical model was developed for the rubber-hydraulic suspension component to examine its dynamic characteristics, hydraulic damping, and hydraulic force amplification transmission laws. Lastly, we organically combine the electromagnetic actuator with the rubber-hydraulic suspension and conduct a multi-physics joint simulation of the integrated vibration isolator using Comsol software to verify the effectiveness of the optimized design and vibration isolation control. Experimental research was carried out on the dynamic characteristics, output force properties, and fatigue characteristics of the integrated vibration isolator prototype. Results indicated that the established models and methods can achieve over 90% accuracy in predicting the performance of the electromagnetic actuator's output force and exhibit good linearity within the 5–400 Hz range. The rubber-hydraulic suspension can achieve an amplification factor of up to 1.5 for the electromagnetic force while reducing the transmission of vibrations to the base. The research findings can enhance the low-frequency vibration isolation performance of marine machinery equipment and improve their acoustic stealth capabilities.

The optimal design of the mounting rubber system for reducing vibration of the air compressor focusing on complex dynamic stiffness

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Optimization of a commercial vehicle powertrain mounting system based on new rubber mounts

Dynamics And Control Of Elevators With Large Gaps And Rubber Dampers

Genetic algorithm-based shape optimization of rubber mount for tractor-cabin mounting system

Optimal design of dynamic vibration absorber for elastic vibration control of vehicle carbody in time-varying service environment

Modeling of Hyper-Viscoelastic Properties of High-Damping Rubber Materials during the Cyclic Tension and Compression Process in the Vertical Direction

Study on the Impact of Shock Absorber on Vibration and Noise of Air-conditioner's Outdoor Unit

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Feasibility Study on Active Structural Attenuation: Addressing Multiband Vibration in Automotive Vehicles on 2D Asymmetric Structures with a Faulty Horizontal Actuator

Design and Experimental Study on Vibration Reduction of an UAV Lidar Using Rubber Material

Research on the Empirical Formulae of Rubber Cushion Stiffness

Feasibility study on the active structural attenuation of multiple band vibrations from two dimensional continuous structures in automotive vehicles

Finite Element Analysis of Engine Vibration Isolation Rubber Mount

Analytical Analysis Approach to Nonlinear Dynamic Characteristics of Hydraulically Damped Rubber Mount for Vehicle Engine

Optimal Design and Mechanical Simulation of Rubber bushing with Convex Hull Structure Based on Bionics

Vibration prediction and experimental validation of a rotary compressor based on multi-body dynamics

Study of the Dynamic Model and Vibration Performance of Pot-Shaped Metal Rubber

Design and experiment of electromagnetic-hydraulic-rubber integrated vibration isolator

Modeling Method of Constitutive Law of Rubber Hyperelasticity Based on Finite Element Simulations

Design and Development of an Active Suspension System Using Pneumatic-Muscle Actuator and Intelligent Control