Abstract:The work presented in this paper outlines the development of a simulation model to aid in the design and development of a compliant sprocket for balancer drives. A design with dual-mass flywheel and a crankmounted compliant chain sprocket greatly reduces interior noise levels due to chain meshing. However, experimental observations showed the compliant sprocket can enter into resonance and generate excessive vibration energy during startup. Special features are incorporated into the compliant sprocket design to absorb and dissipate this energy. Additional damper spring rate, high hysteresis and large motion angle that overlap the driving range may solve the problem during engine start-up period.This work develops a simulation model to help interpret the measured data and rank the effectiveness of the design alternatives. A Multibody dynamics system (MBS) model of the balancer chain drive has been developed, validated, and used to investigate the chain noise. This model includes a cranktrain system coupled to a full balancer drive system that includes the chain drive, balance shafts, and water pump. The nonlinear stiffness and damping effects of the baseline compliant crank chain sprocket and its design iterations are added to the model to understand the basic characteristics and find an optimal setup for the engine start-up period. New MBS solver methodologies were implemented and the subsequent productivity increases are quantified. For subjective noise assessment, simulations of a solid sprocket versus compliant sprocket balancer drive were carried out and compared for certain operating engine speed.

Vibration prediction and experimental validation of a rotary compressor based on multi-body dynamics

Optimization for Compressor Crankshaft by Multi-Body Dynamics Analysis Method

Innovative design and experimental validation of dynamic balance in rotary compressors based on particle damping energy dissipation technology

Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

A THREE-DIMENSIONAL ANALYTICAL STABILITY MODEL OF CONTRA -ROTATING COMPRESSORS BASED ON PARTIAL SIMPLIFICATION OF EULER EQUATION

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation

Dynamic analyses for the rotor-journal bearing system of a variable speed rotary compressor

Torsional Vibration Characteristics Analysis and Vibration Suppression Research of Compressor Flexible Rotor System Considering Fit Clearance

Modeling and Simulation of Torsional Vibration of the Compliant Sprocket in Balance Chain Drive Systems

Dynamic Simulation and Analysis of Reciprocating Compressor with Bearing Clearance and Rigid-flexible Coupling Model

Numerical Simulation and Experimental Validation of the Vibration Modes for a Processing Reciprocating Compressor

Experimental investigation on the vibration characteristics of the compressor in the outdoor unit of a household air conditioner

Torsional Vibration Analysis for Large-Scale Reciprocating Compressor Crankshaft

Gas Dynamics Analysis of a Rotary Compressor Based on CFD

Dynamic behaviors of the crankshafts in single-cylinder and twin-cylinder rotary compressors

Vibration Prediction and Failure Analysis Based on Refined Modeling of Turbocharging Rotor System with Variable Cross Sections

Dynamic Balance Technology of Inverter Controller Rotary Compressor

Multi-Level Modeling Method For Vibration Analysis Of Compressor Rotating

A Dynamic Model for Pin Coupling Anti-Rotation Mechanism of Automotive Scroll Compressor

Investigation of Suction Pressure Pulsation Prediction of Rotary Compressor with Total Variation Diminishing Scheme and One-Dimensional Accumulator Model