Abstract:Cu2SnS3 (CTS), a typical ternary copper-based sulfide, is considered as a potential p-type thermoelectric (TE) material with the advantages of environmental friendliness and low cost, but its performance is limited by the high lattice thermal conductivity and electrical resistivity. Herein, we have successfully synthesized undoped and In-doped CTS nanoparticles with a pure tetragonal phase by the colloidal method. More interestingly, plenty of twin boundaries appear in all the samples sintered from the synthesized nanoparticles independent of composition. The twin boundaries can effectively reduce the lattice thermal conductivity, while the tetragonal phase is beneficial to meliorate the electrical performance of CTS. Consequently, the highest zT reaches 0.36 at 700 K for Cu2Sn0.85In0.15S3, which is enhanced by 17 times compared to that of the pristine CTS with mainly the monoclinic phase. The tunable phase and microstructure via the colloidal method provide useful guidance to promote the performance of eco-friendly TE sulfides.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01483.Lattice thermal conductivity (κl) calculation; observed, calculated, and difference Rietveld refined XRD patterns for Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples; SEM images under different magnifications of the Cu2Sn0.85In0.15S3-sintered sample; temperature dependence of electrical conductivity, Seebeck coefficient, PF of Cu2Sn0.85In0.15S3 ("brm" stands for before reversible measurement, "arm" stands for after reversible measurement); XRD patterns of Cu2Sn0.85In0.15S3; calculated band structures of In-doped t-CTS (Cu2Sn0.75In0.25S3); low-magnification TEM image, HRTEM image of Cu2SnS3; structural data (position, occupancies, Biso, and bond distances) of m-CTS, t-CTS, and c-CTS; and carrier concentration of Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples (PDF)This article has not yet been cited by other publications.

Pseudopolymorphic Phase Engineering for Improved Thermoelectric Performance in Copper Sulfides

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

High Thermoelectric Performance in Cu2SnS3 by Control Over Phase‐Dependent Mobility Edge

Band Engineering Through Pb‐Doping of Nanocrystal Building Blocks to Enhance Thermoelectric Performance in Cu3SbSe4

Simultaneous Enhancement in the Power Factor and Thermoelectric Performance of Copper Sulfide by In2s3 Doping

Approaching high thermoelectric performance in p-type Cu3SbS4-based materials by rational electronic and nano/microstructural engineering

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

Enhanced Thermoelectric Performance in Polymorphic Heavily Co-doped Cu2SnS3 Through Carrier Compensation by Sb Substitution

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Thermoelectric Performance Enhancement of Cu2S by Se Doping Leading to a Simultaneous Power Factor Increase and Thermal Conductivity Reduction

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Synergistically optimized electron and phonon transport in high-performance copper sulfides thermoelectric materials via one-pot modulation

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu 2 SnS 3

Unconventional Doping Effect Leads to Ultrahigh Average Thermoelectric Power Factor in Cu 3 SbSe 4 ‐Based Composites

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

The High‐Pressure Processed Cu 2 S: Phase Intergrowth with Strained Lamella Leading to an Improved Thermoelectric Performance

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Unlocking the Potential of Cu3SbSe3: Ultralow Thermal Conductivity and Enhanced Thermoelectric Performance

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu 1.8 S via Carrier Concentration Regulation and Multiscale Phonon Scattering

Cu2−xS and Cu2−xSe Alloys: Investigating the Influence of Ag, Zn, and Ni Doping on Structure and Transport Behavior