Abstract:As an eco-friendly thermoelectric material, Cu2SnSe3 has recently drawn much attention. However, its high electrical resistivity ρ and low thermopower S prohibit its thermoelectric performance. Herein, we show that a widened band gap and the increased density of states are achieved via S alloying, resulting in 1.6 times enhancement of S (from 170 to 277 μV/K). Moreover, doping In at the Sn site can cause a 19-fold decrease of ρ and a 2.2 times enhancement of S (at room temperature) due to both multivalence bands' participation in electrical transport and the further enhancement of the density of states effective mass, which allows a sharp increase in the power factor. As a result, PF = 9.3 μW cm–1 K–2 was achieved at ∼800 K for the Cu2Sn0.82In0.18Se2.7S0.3 sample. Besides, as large as 44% reduction of lattice thermal conductivity is obtained via intensified phonon scattering by In-doping-induced formation of multidimensional defects, such as Sn vacancies, dislocations, twin boundaries, and CuInSe2 nanoprecipitates. Consequently, a record high figure of merit of ZT = 1.51 at 858 K is acquired for Cu2Sn0.82In0.18Se2.7S0.3, which is 4.7-fold larger than that of pristine Cu2SnSe3.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c03120?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c03120</a>.Temperature dependence of Cp for Cu2SnSe3, Cu2SnSe2.7S0.3, and Cu2Sn0.82In0.18Se2.7S0.3; phase characterization for all investigated samples; temperature dependence of the ZT value for Cu2SnSe3–xSx and the repeatability of thermoelectric performance for Cu2Sn0.82In0.18Se2.7S0.3; calculation details of md*; optical band gaps for S-alloyed Cu2SnSe3; unfolded effective band structure of Cu2SnSe3; calculation of lattice thermal conductivity via the Debye–Callaway model; and the calculation details of thermopower-dependent thermoelectric properties (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03120/suppl_file/nn1c03120_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synergistically optimized electron and phonon transport in high-performance copper sulfides thermoelectric materials via one-pot modulation

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

Enhanced thermoelectric properties of Cu3SbSe4-based materials by synergistic modulation of carrier concentration and phonon scattering

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

Superior thermoelectric performance in non-stoichiometric Cu 3 SbSe 4 system: towards synergistic optimization of carrier and phonon transport

Synergistically Optimizing Electrical and Thermal Transport Properties of BiCuSeO Via a Dual‐Doping Approach

Highly stabilized and efficient thermoelectric copper selenide

Synergistic modulation of electrical and thermal transport toward promising n-type MgOCuSbSe2 thermoelectric performance by MO-intercalated CuSbSe2

Boosting Thermoelectric Performance of Cu 2 SnSe 3 via Comprehensive Band Structure Regulation and Intensified Phonon Scattering by Multidimensional Defects

Enhanced Thermoelectric Performance Through Optimizing Structure of Anionic Framework in AgCuTe-based Materials

Highly enhanced stability and thermoelectric performance of copper sulfides-based composites by multiphase engineering

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Raising the Thermoelectric Performance in Pb/In-Codoped BiCuSeO by Alleviating the Contradiction between Carrier Mobility and Lattice Thermal Conductivity

Enhancement of the thermoelectric properties of MnSb2Se4 through Cu resonant doping

High Thermoelectric Performance in Cu2SnS3 by Control Over Phase‐Dependent Mobility Edge

Synergistic Optimization of Thermoelectric Performance in SnSe2 through co-doping: Anionic Vacancy Formation and Band Engineering

Improved thermoelectric performance of α- and β- Cu 2 Se through suppression of hole density using extrinsic copper vacancies

Defect Chemistry Engineering Promotes the Dopability of Cu for an Extraordinary Thermoelectric Performance of Hole-Doped PbSe with Resonant States

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring