Abstract:Clay minerals are inexpensive, sustainable, and abundant natural minerals being considered as replacements for cement binders. For this purpose, clays have to be activated to improve their pozzolanic activity, i.e., to yield an amorphous aluminosilicate phase that can easily react with calcium hydroxide to form binding phases; additional calcium aluminosilicate hydrate and calcium aluminate hydrates. Activation plays a key role in boosting the cement replacing potential of clay minerals, with the key to understanding activation lying in the control of dehydroxylation. This work promotes mechanochemical activations for comprehensive executing, monitoring and understanding of the dehydroxylation during clay activation. We monitored the mechanochemical conditions, yield degree of amorphization and heat of hydration. Considering the lower dissipation of thermal energy and better control of amorphization mechanochemical conditions were set at 400 rpm for 2 h. Results point out to the disruption of the kaolinite structure on behalf of chemically bound water release and reorganization of Al chemical bonds. The results indicate that with an increase in TGA steps, there are shifts in kaolin dehydroxylation processes, such as water evaporation and spinel crystallization (DTA), as well as shifts in the respective IR bands. Additionally, there is an increase in specific surface area (BET) and a decrease in particle size (SEM, XRD). Calorimetry of the cement paste CEM I 52.5 N indicates an apparently higher thermal reactivity of the aluminate phase compared to the silicate phase as a function of the particle size distribution. The presence of the mechanochemically activated clay changed the morphology, particle size, specific surface area, amorphous content, and thus the availability of pozzolanic aluminum for cement hydration reactions, which is thereby accelerated. It was observed the aluminate phase exhibits higher reactivity. The hydration mechanisms of the silicate (C 3 S) and aluminate (C 3 A) phases as well as the depletion of SO 4 2– ions were affected. Consequently, mechanochemical processing can be utilized as a powerful tool to activate pozzolanic clay with cement-replacing potential.

Build-up formation in cement kiln preheater: qualitative and quantitative mineral characterization

Experimental study on the relationship between the mineral production capability and the physiochemical properties in the coproduction of Q phase-3CaO·3Al2O3·CaSO4 cement clinker

Thermodynamic Analysis on Mineral Formation of Q-phase Cement Clinkers Cogenerated from Low-sulfur Coal Combustion

Cement kiln dust-based geopolymer: Microstructural investigation and performances optimization through response surface methodology

Reduction of clinkerization temperature by using phosphogypsum

Kinetic and thermodynamic analysis on preparation of belite-calcium sulphoaluminate cement using electrolytic manganese residue and barium slag by TGA

A Lab-Scale Evaluation of Parameters Influencing the Mechanical Activation of Kaolin Using the Design of Experiments

Formation, Reduction and Emission Behaviors of CBzs and PCDD/Fs from Cement Plants

Hydration kinetics of C3A: effect of lithium, copper and sulfur-based mineralizers

Toward smart and sustainable cement manufacturing process: Analysis and optimization of cement clinker quality using thermodynamic and data-informed approaches

Thermodynamic modelling of cements clinkering process as a tool for optimising the proportioning of raw meals containing alternative materials

Experimental Investigation of Mineral Particle Deposition in the Cement Production Process

Calorimetric study of the pozzolanic potential developed by the mechanochemical activation of kaolin clay

Ferritic calcium sulfoaluminate belite cement from metallurgical industry residues and phosphogypsum: Clinker production, scale-up, and microstructural characterisation

In situ powder diffraction study of belite sulfoaluminate clinkering

Synthesis and Sintering Reaction Mechanism of High-Performance MgO-CaO-Fe2O3 Clinker

Coproduction of Belite Q-phase Cement Clinker in a Pulverized Coal Combustion Boiler and Its Hydration Performance

Low-cost northern Tunisian kaolinitic clay-based refractory materials and effect of a rich alumina clay addition

CFD-aided Optimization of the Decomposition Kinetics of Cement Raw Meals under High CO2 Concentrations

Unveiling the key factors for clinker reactivity and cement performance: A physic-chemical and performance investigation of 40 industrial clinkers

Effect of CuO on the Burnability and Mineral Formation of High C3S Cement Clinker