Abstract:In the field of advanced packaging, large-size silicon wafers are usually thinned by ultra-precision grinding technology relying on the process of workpiece self-rotation. However, the damage caused by mechanical material removal deteriorates the wafer surface flatness and die strength, while its atomic-scale formation principle has yet to be revealed. This work explores the ductile deformation and subsurface damage evolution mechanism of silicon wafer during the ultra-precision grinding process. Some grinding tests are first conducted using different diamond wheels. The surface topography and energy dispersive spectroscopy (EDS) mapping of ground wafers are measured by scanning electron microscope (SEM). The phase transition properties of the ground silicon wafer are confirmed via Raman spectrum. Next, the specimen of groove cross-section is fabricated and its morphology is examined via transmission electron microscopy (TEM) to analyze the subsurface damage characteristics. The subsurface defects at the atomic scale, involving amorphous layer, dislocations, stacking faults and lattice distortions, are observed. Due to its controllable load and similarity of the cutting motion, nanoscratch is utilized for investigating the influence of abrasive interactions on subsurface deformation during the grinding process. Thus, a series of multiple nanoscratch tests are performed in both varied and constant force modes. The material removal behaviors under different scratching conditions are illustrated. This work provides a fundamental understanding of developing a high-efficiency and low-damage thinning method for 12-inch silicon wafers.

High surface integrity fabrication of silicon wafers using a newly developed nonwoven structured grind-polishing wheel

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

The study of the resin-bond diamond wheel for IC silicon wafer nanoscale roughness back grinding

Nanoscale smooth and damage-free polycrystalline diamond surface ground by coarse diamond grinding wheel

Ductile deformation and subsurface damage evolution mechanism of silicon wafer induced by ultra-precision grinding process

Novel Vitrified-Bond Ultra-Fine Grinding Technology for SiC Polishing

Improved grinding performance of SiC using an innovative bionic vein-like structured grinding wheel optimized by hydrodynamics

Fused Silica Fine Grinding with Low Roughness

Mechanism analysis and process optimization of nanogrinding single-crystal SiC

Experimental investigation on the feasibility of high-efficiency and precision grinding of silicon carbide ceramics with monolayer brazed diamond wheel

Laser Grinding of Single-Crystal Silicon Wafer for Surface Finishing and Electrical Properties

Grinding performance evaluation of SiC ceramic by bird feather-like structure diamond grinding wheel

The mechanisms of high-efficiency grinding for micro/meso-structural arrays on ceramic moulds through an innovative wheel truing technology

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Thermal defects generation mechanism in laser precision dressing of metal-bonded micro-groove diamond wheel and their influence on grinding silicon wafer

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

Modeling on the Flatness of Silicon Wafers Ground by the Grind-polishing Wheel

Surface and subsurface cracks characteristics of single crystal SiC wafer in surface machining

An Experimental Investigation of Sapphire Grinding by Porous and Vitrified M0.5/1.5 Diamond Grinding Wheel