Abstract:A micromechanical model based on probabilistic principles is proposed to determine the effective fracture toughness increment and the bridging stress-crack opening displacement relationship for brittle matrix composites reinforced with short, poorly bonded fibers. Emphasis is placed on studying the effect of fiber extensibility on the bridging stress and the bridging fracture energy, and to determine its importance in cementitious matrix composites. Since the fibers may not be in an ideal aligned or random state, the analysis is placed in sufficiently general terms to consider any prescribable fiber orientation distribution. The model incorporates the snubbing effect observed during pull-out of fibers inclined at an angle to the crack face normal. In addition, the model allows the fibers to break; any fiber whose load meets or exceeds a single-valued failure stress will fracture rather than pull out. The crack bridging results may be expressed as the sum of results for inextensible fibers and an additional term due to fiber extensibility. An exact analysis is given which gives the steady-state bridging toughness G directly, but presents a non-linear problem for the bridging stress-crack opening (σb – δ) relationship. An approximate analysis is then presented which gives both G and σb – δ directly. To illustrate the effect of extensibility on bridging stress and fracture energy increment due to bridging fibers, a comparison with the inextensible fiber case is provided. It is found that effect of extensibility on fracture energy is negligible for common materials systems. However, extensibility may have a significant effect on the bridging stress-crack opening relationship. The effect of other physical and material parameters such as fiber length, fiber orientation and snubbing friction coefficient is also studied.

Prediction Of Durability Of A Fiber Bundle Under Uniaxial Tension On The Basis Of The Thermal-Fluctuation Model Of Its Brittle Fracture

Dynamic Fracture in Brittle Solids at High Rates of Loading

A lattice gas model for the incompressible Navier-Stokes equation

Fracture failure analysis of plastic fiber based on thermodynamic strength theory and experiment

Time dependent fracture under unloading in a fiber bundle model

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Creep rupture of materials: insights from a fiber bundle model with relaxation

A Sketch of Some Stochastic Models and Analysis Methods for Fiber Bundle Failure under Increasing Tensile Load

Experimental Evaluation Of The Strength Distribution Of Fibers Under High Strain Rates By Bimodal Weibull Distribution

Tensile properties and constitutive modeling of Kevlar29 fibers: from filaments to bundles

Failure due to fatigue in fiber bundles and solids

Modeling the Rate-Dependent Ductile-Brittle Transition in Amorphous Polymers

Inequality of creep avalanches can predict imminent breakdown

Failure properties of fiber bundle models

Tensile mechanical behavior of T300 and M40J fiber bundles at different strain rate

Energy bursts in fiber bundle models of composite materials

A fiber-bundle model for the continuum deformation of brittle material

A Statistical Model and Experimental Study of the Strain Rate and Temperature Dependence of the Strength of Fibers

Effect of Fiber Extensibility on the Fracture Toughness of Short Fiber or Brittle Matrix Composites

Prediction of overall tension behavior of short fiber-reinforced composites

Damage in Fiber Bundle Models