Abstract:The theory of two-leveled randomly-enlarging critical core was put forward to predict the tensile strength of unidirectional bundle-reinforced composites. According to the manufacture technologies of FRP, a model was established to calculate the fiber spacing and the quantity of fibers in a bundle. The fibers in composites were treated through 2 levels: fiber bundle, and array of fiber bundles. The father core and son core were put forward so as to precisely describe the structure of a critical core. Beyerlein's formula was adopted to calculate the average stress concentration factor of the bundle, which is caused by the sequential failure of bundles. Sivasambu's formula was applied to calculating the stress concentration factor of the fiber inside bundle, which is caused by the sequential failure of fibers. Based on the propagation mode of fiber's failure, according to the statistics theory, considering the enlarging ineffective length inside the bundle, the formulas calculating the failure possibility of composites were deduced. A computer program was compiled. Through this program, the tensile strengths of plastics reinforced respectively by unidirectional woven rovings of S glass, E glass, and Basalt fiber were predicted. Meanwhile, along with the mechanical performance of the matrix under tension and shearing, the tensile strengths of these FRPs were gained through experiments. Then, the predicted results were compared with the experiment results. Research result shows that the predicted results, which meet the experiments, can be gained by directly inputting the material and geometry parameters of experiment specimens.

Fracture failure analysis of plastic fiber based on thermodynamic strength theory and experiment

Characterization of Failure Behavior in Unidirectional Fiber-Reinforced Polymer Via Off-Axis Compression on Small Block Specimens.

Fracture Characteristics and Energy Dissipation of Textile Bamboo Fiber Reinforced Polymer

Dynamic Tensile Behavior of Fiber Reinforced Materials Based on Fiber Layering Modeling

Failure analysis of unidirectional FRP with fiber clusters under transverse pure shear

Tensile properties and constitutive modeling of Kevlar29 fibers: from filaments to bundles

Numerical Study on Rupture Process of Fiber-Reinforced Composites

A Three-Phase Model of the Single-Fiber Composite Fragmentation Test to Evaluate Viscoelasticity, Stress Distribution and Interface Fracture Toughness

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

A Statistical Model and Experimental Study of the Strain Rate and Temperature Dependence of the Strength of Fibers

Probabilistic Model for Structural Mechanics of Fiber Bundle and Its Application to PBO Fiber

Strength prediction for unidirectional FRP based on the theory of two-leveled randomly enlarging critical core

Modeling the Effects of Interfacial Properties on the Temperature Dependent Tensile Strength of Fiber Reinforced Polymer Composites

STUDY ON THE THEORY OF STRENGTH OF SHORT FIBER/RUBBER COMPOSITES I PREDICTION OF LONGITUDINAL TENSILE STRENGTH

Theoretical Models on the Fracture Strengths of Ceramic Single Crystal Fibers at Different Temperatures and Test Rates

Tensile Strength Statistics and Fracture Mechanism of Ultrahigh Molecular Weight Polyethylene Fibers: On the Weibull Distribution

A simple fracture energy prediction method for fiber network based on its morphological features extracted by X-ray tomography

A Micromechanical Model for Longitudinal Compressive Failure in Unidirectional Fiber Reinforced Composite

A micromechanical model for the temperature dependent tensile strength of cross-ply fiber reinforced polymer composites

Cyclically Thermomechanical Plasticity Analysis for a Broken Fiber in Ductile Matrix Composites Using Shear Lag Model

Experimental Study On Dynamic Properties Of High Strength Fiber Clusters