Abstract:Carbon fibers and corresponding composites are being widely used in strengthening and repairing existing reinforced concrete structures. The piezoresistive effect of carbon fibers can be applied to self-monitor its stress and damage. However, rare piezoresistive models can be found in the literature considering the mesoscopic mechanism and material randomness of carbon fiber bundles to quantify the piezoresistive effect. The piezoresistive effect of carbon fiber bundles is mainly affected by the elastic deformation, breakage, and contact of filaments. In this paper, according to the analysis of these factors, a dynamic random equivalent parallel circuit model was established to quantify the piezoresistive effect of carbon fiber bundles during tension. With tensile results of 54 carbon fiber bundles, the uncertainties of filaments, such as the initial breakage, tensile breakage and contact change, were analyzed and their probability distributions were determined. The strength of filaments is subject to the Weibull distribution. Kolmogorov–Smirnov (K–S) test results show that the initial breakage ratio obeys a truncated lognormal distribution and the relative contact ratio change obeys a truncated normal distribution. Then Monte Carlo simulations were used to calculate the electrical resistance of carbon fiber bundles during tension. Comparing the simulated resistance with that of 15 verifying specimens, this piezoresistive model and calculation method is reliable and valid.

Energy bursts in fiber bundle models of composite materials

Variation of elastic energy shows reliable signal of upcoming catastrophic failure

Creep rupture of materials: insights from a fiber bundle model with relaxation

Failure properties of fiber bundle models

Scaling laws of creep rupture of fiber bundles

A Sketch of Some Stochastic Models and Analysis Methods for Fiber Bundle Failure under Increasing Tensile Load

Failure due to fatigue in fiber bundles and solids

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

A Recipe for Composite Materials: An Approach through Fiber Bundle Model

Damage in Fiber Bundle Models

A damage-mechanics model for fracture nucleation and propagation

Breakdown of fiber bundles with stochastic load-redistribution

Developing a stochastic linear elastic material model and composite laminate theory including failures, using the fiber bundle–based approach

Time dependent fracture under unloading in a fiber bundle model

Damage process of a fiber bundle with a strain gradient

Dynamic critical behavior of failure and plastic deformation in the random fiber bundle model

Tensile properties of short fiber composites with fiber strength distribution

Prediction Of Durability Of A Fiber Bundle Under Uniaxial Tension On The Basis Of The Thermal-Fluctuation Model Of Its Brittle Fracture

Thermodynamics of fiber bundles

A lattice gas model for the incompressible Navier-Stokes equation

Stability in fiber bundle model : Existence of strong links and the effect of disorder