Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Developing a stochastic linear elastic material model and composite laminate theory including failures, using the fiber bundle–based approach

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Progressive failure analysis of 2D woven composites at the meso-micro scale

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

An efficient micromechanics-based finite element model for failure analysis of laminated composites

A combined viscoelasticity-viscoplasticity-anisotropic damage model with evolving internal state variables applied to fiber reinforced polymer composites

A Sketch of Some Stochastic Models and Analysis Methods for Fiber Bundle Failure under Increasing Tensile Load

A strain rate dependent and anisotropic failure material model for short fiber reinforced plastics based on energy density accounting for local fiber orientation

An Auto-Generated Geometry-Based Discrete Finite Element Model for Damage Evolution in Composite Laminates with Arbitrary Stacking Sequence

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

A unified damage model for fibrous composite laminae subject to in-plane stress-state and having multi material-nonlinearity

Explanation of Strain Softening and Numerical Modeling to the Failure Process of Laminated Composite Material

On the experimental determination and prediction of damage evolution in composites via cyclic testing

A non-local damage model-based FFT framework for elastic-plastic failure analysis of UD fiber-reinforced polymer composites

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Simulation Study of the Damage Mechanisms Appearing in a Cross Ply Composite Material Loaded in Uniaxial Tension

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Constitutive Modelling of Laminated Fibre-Reinforced Composites

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites