Abstract:The failure of fiber-reinforced ceramic and metal matrix composites under a fixed load for extended times occurs because of strength degradation in the constituent fibers. Specifically, the ceramic fibers possess a Weibull strength distribution caused by crack-like flaws, which can grow according to a power-law growth mechanism. Failure of individual fibers causes interfacial slippage and stress redistribution to unfailed fibers, which in turn accelerates the degradation rate of the remaining fibers, and culminates in abrupt failure of the composite after sufficient damage has accumulated. This sequence of events is modeled both analytically and numerically within the Global Load Sharing (GLS) approximation previously utilized for quasi-static loading. Analytically, a general constitutive model for the relationship between the stress on the damaged fiber bundle, the strain in the unbroken fibers, and the extent of damage, is combined with a time-dependent damage evolution equation derived from the slow-crack-growth kinetics to yield an integral equation for the strain vs time at fixed applied load. The relevant gauge length for a fixed-load rupture process is found to be δ = rστ which is twice the slip length prevailing at the initial applied load σ, where τ is the interfacial sliding resistance between fiber and matrix. The underlying time scale for rupture is the time scale for a typical fiber of gauge length δ to fail under the applied load σ; this time can be quite different from that measured by stress-rupture tests on single fibers at an unrelated laboratory gauge length L0. A simple, accurate but approximate relationship between applied load, time to failure, fiber Weibull modulus, and slow crack growth exponent is presented. The numerical simulations of the same degradation process verify the general accuracy of the failure time obtained from the analytic results. The remaining tensile strength after some time at load but prior to failure is also studied, and the simulation results generally exhibited a more sudden-death failure than the analytical predictions. A specific application to the failure of a Nicalon fiber composite is presented.

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Developing a stochastic linear elastic material model and composite laminate theory including failures, using the fiber bundle–based approach

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Uncertain buckling characteristics of thermally loaded and internally defected variable fiber spacing composite laminates

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental characterization of traction-separation laws for interlaminar fracture in geometrically-scaled composites using progressive digital image correlation and through-thickness deformation analysis

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

On the experimental determination and prediction of damage evolution in composites via cyclic testing

Time-dependent failure in fiber-reinforced composites by fiber degradation

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

Progressive Failure Analysis of Thin-Walled Composite Structures Verified Experimentally

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

Experimental-Numerical Failure Analysis of Thin-Walled Composite Columns Using Advanced Damage Models

Elastic and Fracture Behavior of Three-Dimensional Ply-to-Ply Angle Interlock Woven Composites: Through-Thickness, Size Effect, and Multiaxial Tests

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Structural-Temporal Peculiarities of Dynamic Deformation of Layered Materials