Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

Identifying and mitigating energy losses in Tesla turbines: A study on CFD optimization

Performance enhancement of a 100 watts class Tesla turbine

Improvement Of A Theoretical Analysis Method For Tesla Turbines

One-dimensional Model Analysis and Performance Assessment of Tesla Turbine

Calculation of the energy loss for tip leakage flow in turbines

Improved Prediction of Aerodynamic Loss Propagation as Entropy Rise in Wind Turbines Using Multifidelity Analysis

Unsteady Aerodynamics Of A Flat Tip And A Winglet Tip In A High-Pressure Turbine

Minimization of loss in small scale axial air turbine using CFD modeling and evolutionary algorithm optimization

Energy Analysis of Francis Turbine for Various Mass Flow Rate Conditions Based on Entropy Production Theory

Analyzing and Validating Energy Performance through Computational Simulation of a Helical Vertical Axis Wind Turbine

Optimization of the Blade Trailing Edge Geometric Parameters for A Small Scale Orc Turbine

Advantages of the Aerodynamic Performance of Micro‐tesla Turbines

Flow Characteristics and Loss Models of the Transonic Radial Turbine

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Comparative Numerical Studies for the Flow Energy Dissipation Features in a Pump-Turbine in Pump Mode and Turbine Mode

Application of Richardson extrapolation method to the CFD simulation of vertical-axis wind turbines and analysis of the flow field

Performance Improvement of a Straight-Bladed Darrieus Hydrokinetic Turbine through Enhanced Winglet Designs

Performance and Loss Analysis of a Small-Scale Supercritical CO2 Turbine

Exergy Efficiency and COP Improvement of a CO2 Transcritical Heat Pump System by Replacing an Expansion Valve with a Tesla Turbine

Experimental and Numerical Investigation of a Turbocharger Turbine Using Exergy Analysis at Non-Adiabatic Conditions