Abstract:Depending on the temperature of operation, there are two major types of fuel cells based on solid-state electrolytes, namely (a) solid oxide fuel cells with an operating temperature of 500–1000 °C, (b) polymer electrolyte membrane fuel cells with an operating temperature in the range 60–200 °C. For the first category, primary focus is given on the development of conventional 8 mol% yttria-stabilized zirconia (8-YSZ)-based materials along with the addition of transitional metal ion dopants that reduce the sintering temperature of the 8-YSZ making fabrication of the cells easier. Possibility of using doped ceria-based electrolyte has also been discussed briefly. Various solid-state electrodes, especially the Sr-doped lanthanum manganite, Sr-doped lanthanum ferrite, Sr-doped lanthanum cobaltite and Sr- and Co-doped barium ferrite, etc., have been reviewed both in terms of general characteristic and also the developmental activities taken up in the authors' laboratory. Similarly, solid-state anode materials, e.g. Ni–YSZ, as developed at authors' laboratory have been critically reviewed with the emphasis on the fabrication of single cell. Functionality in terms of powder synthesis and fabrication of multilayer composite anode have been discussed with electrochemical performance. The cell performance is clinically correlated with the cell microstructure. For the other category, direct alcohol fuel cells (DAFCs) technology has earned a considerable interest as one of the promising electrochemical conversion devices. However, the challenges in DAFCs arise from the need for inexpensive and durable electrocatalyst. In this regard, nanostructured Pt or Pd metal-based electrocatalysts hold the key to its advances. Nanoclusters, nanowire and nanotubes of these noble metals or their alloys have been used extensively. Some of the recent research efforts towards development of both cathode and anode electrocatalysts along with their advantages and disadvantages for low-temperature fuel cell application are highlighted.

Bismuth oxide-based solid electrolytes for fuel cells

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Low temperature solid oxide electrolytes (LT-SOE): A review

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

Bismuth Oxide-Coated (la,sr)mno3 Cathodes for Intermediate Temperature Solid Oxide Fuel Cells with Yttria-Stabilized Zirconia Electrolytes

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Recent advances on electrolyte materials for SOFC: A review

Solid-State Electrolytes and Electrode Materials for Fuel Cell Application

Research on electrolytes for solid oxide fuel cell

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

A new solid oxide fuel cell design based on thin film electrolytes

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

A brief review on ceria based solid electrolytes for solid oxide fuel cells

A Novel Platinum Modified Barium Zirconate-Based Electrolyte for Enhanced Solid Oxide Fuel Cell Performance

Composite electrolyte used for low temperature SOFCs to work at 390°C

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Novel Fluoride-Doped Barium Cerate Applied As Stable Electrolyte in Proton Conducting Solid Oxide Fuel Cells

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

High-conductivity electrolyte with a low sintering temperature for solid oxide fuel cells