Abstract:Grain refinement strongly strengthens the non‐basal slip of Bi2Te3‐based thermoelectric material, and then increase the carrier concentration, hindering the practical preparation of n‐type Bi2Te3 by ball milling method. In this work, enhancing the ball milling energy can facilitate the recovery effect during hot pressing, which can reduce and stabilize the carrier concentration and achieve high thermoelectric and mechanical performances. The carrier concentration in n‐type layered Bi2Te3‐based thermoelectric (TE) material is significantly impacted by the donor‐like effect, which would be further intensified by the nonbasal slip during grain refinement of crushing, milling, and deformation, inducing a big challenge to improve its TE performance and mechanical property simultaneously. In this work, high‐energy refinement and hot‐pressing are used to stabilize the carrier concentration due to the facilitated recovery of cation and anion vacancies. Based on this, combined with SbI3 doping and hot deformation, the optimized carrier concentration and high texture degree are simultaneously realized. As a result, a peak figure of merit (zT) of 1.14 at 323 K for Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 sample with the high bending strength of 100 Mpa is obtained. Furthermore, a 31‐couple thermoelectric cooling device consisted of n‐type Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 and commercial p‐type Bi0.5Sb1.5Te3 legs is fabricated, which generates the large maximum temperature difference (ΔTmax) of 85 K at a hot‐side temperature of 343 K. Thus, the discovery of recovery effect in high energy refinement and hot‐pressing has significant implications for improving TE performance and mechanical strength of n‐type Bi2Te3, thereby promoting its applications in harsh conditions.

Achieving High Thermoelectric Performance of n-Type Bi 2 Te 2.79 Se 0.21 Sintered Materials by Hot-Stacked Deformation

Enhancing Thermoelectric Performance of N-Type Hot Deformed Bismuth-Telluride-Based Solid Solutions by Nonstoichiometry-Mediated Intrinsic Point Defects.

Liquid‐Phase Hot Deformation to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

High-performance near-room-temperature n-type Bi2Te3-based thermoelectric alloys with superior mechanical properties

High thermoelectric and mechanical performance in strong-textured n-type Bi2Te2.7Se0.3 by temperature gradient method

Enhanced Thermoelectric Performance in N-Type Bi2Te3-Based Alloys Via Suppressing Intrinsic Excitation.

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi 0.48 Sb 1.52 Te 3 –AgSbSe 2 Composite

Achieving N- and P-Type Thermoelectric Materials with the Identical Chemical Composition BiSbTe1.5Se1.5 by Defect Structure Engineering

Enhancement in thermoelectric performance of bismuth telluride based alloys by multi-scale microstructural effects

Enhanced Thermoelectric and Mechanical Properties of Zone Melted P-Type (bi,sb)2te3 Thermoelectric Materials by Hot Deformation

Enhancing Thermoelectric Performance in P‐Type Sb 2 Te 3 ‐Based Compounds Through Nb─Ag Co‐Doping with Donor‐Like Effect

Enhancing room-temperature thermoelectric performance of n-type Bi2Te3-based alloys via sulfur alloying

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Attaining Ultrahigh Thermoelectric Performance of Direction-Solidified Bulk N-Type Bi2Te2.4Se0.6 Via Its Liquid State Treatment

High‐Efficiency Thermoelectric Module Based on High‐Performance Bi0.42Sb1.58Te3 Materials

Thermoelectric Performance Enhancement in N -Type Bi 2 (tese) 3 Alloys Owing to Nanoscale Inhomogeneity Combined with a Spark Plasma-Textured Microstructure

Synergistic Improvement of BiI3 and In on Thermoelectric Properties of Zone-Melted n-Type Bi2Te2.7Se0.3

Modulation of Vacancy Defects and Texture for High Performance n‐Type Bi2Te3 via High Energy Refinement

Enhanced Thermoelectric Performance of P‐Type (Bi,Sb)2Te3 by Incorporating Non‐Stoichiometric Ag5Te3 and Refining Te‐Se Ratio

High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization Strategy

Realizing High-Efficiency Thermoelectric Module by Suppressing Donor-Like Effect and Improving Preferred Orientation in N-Type Bi2(Te, Se)3