Abstract:The problem of electric rolling stock traction machinery failures caused by electrical erosion of bearings is addressed. Damages inflicted to traction machinery bearings as a result of electric current flowing through them have been known since long ago. In recent time, however, damages of this kind have become more frequent, because frequency and voltage converters for control of three-phase inductor motors are widely used in the electric rolling stock. An overview of factors causing the occurrence of stray currents generated in frequency converter driven traction motors and sources of these currents is presented. Electric current flows through rolling bearings in the area of the contact between the rolling elements with inner and outer rings, thus causing damage to the bearing metal components' rolling surfaces and degrading the quality of lubricants. To study and analyze the currents through bearings, the stray capacitances existing in traction machines are determined, and their calculation methods are defined, the necessity of which is stemming from the fact that these capacitances influence the generation of parasitic currents. The stray capacitances in traction machines include the capacitance between the stator windings and the stator core pack, the capacitance between the stator windings and the rotor, the capacitance between the rotor and the stator core pack, and the capacitances of the bearings. From the electrical point of view, bearings may also be regarded as capacitances. As long as there is a continuous lubricant film between the inner ring and outer rings and the rolling elements, the bearings behave as capacitors. A difference of potentials across the bearing elements may lead to electrostatic discharges and, hence, to discharge currents through the bearings. One of possible ways to enhance the reliability of traction machine bearing units is to use insulated bearings. The change in the impedance of bearings with ceramic coating and hybrid rolling elements depending on the applied voltage frequency and operating temperature is calculated and analyzed. Conclusions regarding the expediency of using hybrid bearings having rings made of bearing steel and rolling elements made of bearing silicon nitride (Si3N4) are drawn.

Basic experimental and numerical investigations to improve the modeling of the electrical capacitance of rolling bearings

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Analysis of capacitive discharges in motor bearings under different operation conditions

A Statistical Prediction of Electrical Discharge Initiation and Semi-Analytical Transient Mixed Lubrication Model of a Rolling Element

Thermal Modeling of an Electrolytic Capacitor Bank

Lubrication Analysis of Journal Bearing and Rotor System Using Cfd and Fsi Techniques

A Review of Modeling and Mitigation Techniques for Bearing Currents in Electrical Machines With Variable-Frequency Drives

Ways to Improve the Reliability of Bearings in Traction Induction Machines

Dynamic simulation of a cylindrical roller bearing with a local defect by combining finite element and lumped parameter models

Research on Bearing Current Detection Method of High-speed Motor Driven by PWM Inverter

An Efficient Modeling Method for the Simulation of Ball Bearing Dynamics

Dynamic modeling and force-vibration mapping mechanism construction of rolling bearings considering cage flexibility and local faults

Simulation and Experimental Analysis of Rolling Element Bearing Fault in Rotor-Bearing-casing System

Tribological models for advanced ball bearing simulation

A New Dynamic Model for Cylindrical Roller Bearings with Flexible Rollers and Bearing Sliding Investigation

Dynamic modeling and simulation of rolling ball bearings with localized surface defects

Analysis on Discharge Coefficients in FEM Modeling of Hybrid Air Journal Bearings and Experimental Validation

Stiffness Matrix Calculation of Rolling Element Bearings Using a Finite Element/contact Mechanics Model

Research on Fractional-Order Modeling of Nonlaminated Electromagnetic Bearings Considering Eddy Current Effects

Numerical Research on the Electrical Contact Model and Thermal Analysis of the Roll-Ring

A Simplified Bearing Testbed for Evaluating Bearing Current and Degradation in Wide Bandgap Inverter Fed Electric Machines