Abstract:This study reports the investigation of the morphology of the surface damaged during the laser scribing of glass and the analysis of the corresponding interaction mechanism between the laser and glass. In this study, the soda lime glass of 1.1 mm thick is scribed by an ultraviolet (UV) picosecond laser (Nd:YVO4) by varying laser power, scan speed and number of scans. From the analysis of experimental results, it is found that the surface morphology can be classified as three groups such as swelled surface, wave pattern (either shallow or deep) and groove depending on the accumulated laser energy per unit beam spot. The accumulation of the large laser energy (12–30 × 10−4 J) into the material induces volume meting and local vaporization below the surface without material removal, which makes bubbles inside glass volume and swelled surface through volume expansion. With the decrease of the energy accumulation (4.2–9 × 10−4 J), the surface morphology is changed into shallow wave pattern by slight material removal. With further decrease of the laser energy accumulation (1.4–3 × 10−4 J), either deep wave or groove morphology is obtained due to the increase of the material removal. Under very low laser energy accumulation region (0.3–1.05 × 10−4 J), the groove shape is only formed. In particular, the groove morphology without cracking is successfully produced within the range of 0.3–0.5 × 10−4 J. The threshold laser energy accumulation for surface damage is found to be around 0.25–0.3 × 10−4 J. Below this energy accumulation, modification in the surface morphology doesn’t occur. It is also found that the groove morphology is hard to obtain by even multiple laser scans if it is not well formed by single laser scan. The cracks produced during the scribing process can be characterized with several propagation morphologies. At the region of the relatively low laser energy accumulation, cracks propagating across the scan direction are only generated. However, cracks propagating both across and along the scan direction are found with the increase of the laser energy accumulation. Huge cracks (arc or sinusoidal curve shape) of several millimeters in size are produced under the very large laser energy accumulation.

Influence of thermal expansion coefficient in laser scribing of glass

Influence of glass substrate thickness in laser scribing of glass

Thermal stress analysis on laser scribing of glass

Three-dimensional thermal stress analysis on laser scribing of glass

Research on the Formation Process and Properties of Alumino-Borosilicate Glasses

Ab Initio Molecular Dynamics Simulation of the Structural and Electronic Properties of Aluminoborosilicate Glass

Investigation of the surface morphology in glass scribing with a UV picosecond laser

Numerical Simulations of Thermal Lens Effect in K9 Glass Induced by Millisecond Laser Irradiation

Sintering Behaviors, Microstructure and Properties of Li2O-Al2O3-SiO2 Glass-ceramics for LTCC Applications

Micro‐scale mechanical properties of surface layer in ion‐exchanged glass

Crack arrest and stress dependence of laser-induced surface damage in fused-silica and borosilicate glass

The effect of nucleating temperature on the crystallization, phase formation and properties of lithium aluminum silicate (LAS) glass-ceramics

Numerical analysis of laser-controlled thermal stress cutting of an alumina ceramic

Crystallization and Thermal Expansion Behavior of Lithium Zinc Silicate Sealing Glass

Calculation of Thermal and Mechanical Effect Induced by Laser in Optical Window Materials

Effective thermal strengthening of glass by enhanced configurational entropy at its supercooled state

Experimental Research of YAG Laser Cutting Soda-Lime Glass Sheets with Controlled Fracture

Investigation on the crack fracture mode and edge quality in laser dicing of glass-anisotropic silicon double-layer wafer

An Overview of the Thermal Erasure Mechanisms of Femtosecond Laser‐Induced Nanogratings in Silica Glass

Crystalline / glass nanoscale chemical separation induced by femtosecond laser pulses in aluminosilicate glass

Semiconductor laser asymmetry cutting glass with laser induced thermal-crack propagation