Abstract:Distribution characteristics of the current, ampere force and magnetic flux density (B [T]) of a novel high temperature superconducting (HTS) cable woven by transposed REBCO tapes under different transposition lengths are proposed, and these characteristics of the cable stacked with 3 REBCO tapes are also carried out in this paper for comparison. The objective is to enhance the current density and the compactness of the HTS tapes combination, and uniform the current, ampere force and magnetic flux density (B [T]) distributions. A 3D finite element model (FEM), based on Maxwell's equations without consideration of the displacement current, is established to describe the state of the system in the liquid nitrogen condition. The distributions characteristics, maximum and minimum values of current, ampere force and magnetic flux density (B [T]) show significant differences in the simulation results between the novel HTS cable woven by 3 transposed REBCO tapes and the cable stacked with 3 REBCO tapes. The simulated results show that the distribution characteristics are improved, with a more uniform distribution characteristic than that of the cable stacked with REBCO tapes. This is due to fully transposed REBCO tapes. In addition, the experimental E-I curve was also reached. The experimental results show that using a shorter transposition length in the cable can improve the critical current. However, A too small transposition length can cause significant damage to the HTS tape, resulting in deformation of the HTS tape and a reduction in the electromagnetic properties of the HTS tape. This affects the critical current of the HTS tape and, ultimately, the critical current of the cable. From the point of view of whether the production process is convenient, meets the requirements of economy and reduces costs, we need to find a suitable transposition length. The measured optimal transposition length is 95 mm for the cable woven by 3 REBCO tapes. Ethical Compliance: All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.

Fault Current Characteristics of Self-shielding HTS DC Cable Made of REBCO Tapes

Numerical Study on Fault Current Characteristics of Self-Shielded HTS DC Cables Made of REBCO Tapes in Parallel With Stainless Steel Tapes

Research on Fault Current Endurance Capability of Concentric HTS Cable

Design and Performance Tests of a Fault Current-Limiting-Type Tri-Axial HTS Cable Prototype

Fault Analysis for 110 Kv HTS Power Cables

Analysis of Transient Operating Characteristics of the 10 Kv Tri-Axial HTS Cable Under Fault Current

Critical current characteristics and ampere force distribution of a novel HTS cable with different transposition lengths

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Bending Characteristics of a Transposed Cable (xcable) with In-Plane Bending of REBCO Tapes

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Thermal Characteristics of Concentric High-Temperature Superconducting Cable under Fault

AC Loss Reduction in REBCO Coated Conductors Using the Hexagonal Arrangement Cabling Method

Mechanical Behavior and Critical Current Density Variation of the Twisted Stacked-Tape Slotted-Core Cable-in-conduit Conductor under Bending and Axial Tensile Load

Research on overcurrent stability of HTS cable for energy pipeline

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

AC Loss and Contact Resistance in Highly Flexible Rebco Cable for Fusion Applications

The current unbalance in stacked REBCO tapes -- simulations based on a circuit grid model

Dynamic resistance of a REBCO tape carrying direct current under a mixture magnetic field of ac field with dc-biased field

Electromagnetic and Mechanical Properties of CORC Cable Due to Screening Current

Current Distribution Investigation of a Laboratory-Scale Coaxial Two-HTS-Layer DC Prototype Cable