Abstract:Distribution characteristics of the current, ampere force and magnetic flux density (B [T]) of a novel high temperature superconducting (HTS) cable woven by transposed REBCO tapes under different transposition lengths are proposed, and these characteristics of the cable stacked with 3 REBCO tapes are also carried out in this paper for comparison. The objective is to enhance the current density and the compactness of the HTS tapes combination, and uniform the current, ampere force and magnetic flux density (B [T]) distributions. A 3D finite element model (FEM), based on Maxwell's equations without consideration of the displacement current, is established to describe the state of the system in the liquid nitrogen condition. The distributions characteristics, maximum and minimum values of current, ampere force and magnetic flux density (B [T]) show significant differences in the simulation results between the novel HTS cable woven by 3 transposed REBCO tapes and the cable stacked with 3 REBCO tapes. The simulated results show that the distribution characteristics are improved, with a more uniform distribution characteristic than that of the cable stacked with REBCO tapes. This is due to fully transposed REBCO tapes. In addition, the experimental E-I curve was also reached. The experimental results show that using a shorter transposition length in the cable can improve the critical current. However, A too small transposition length can cause significant damage to the HTS tape, resulting in deformation of the HTS tape and a reduction in the electromagnetic properties of the HTS tape. This affects the critical current of the HTS tape and, ultimately, the critical current of the cable. From the point of view of whether the production process is convenient, meets the requirements of economy and reduces costs, we need to find a suitable transposition length. The measured optimal transposition length is 95 mm for the cable woven by 3 REBCO tapes. Ethical Compliance: All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes

Numerical models for AC loss calculation in large-scale applications of HTS coated conductors

Numerical Study on Fault Current Characteristics of Self-Shielded HTS DC Cables Made of REBCO Tapes in Parallel With Stainless Steel Tapes

Analysis of Current Distributions in HTS Tapes of Superconducting Bipolar DC Energy Pipeline

Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents

Effect of local and global screening current on the current decay in closed-loop HTS coils

AC losses in HTS sector shaped high-current conductors for fusion coils

Analytical Formulae for Hysteresis Power Loss in Twisted Stacked HTS Cables

Numerical Modeling of AC Loss in HTS Coated Conductors and Roebel Cable Using T-A Formulation and Comparison With H Formulation

Analysis of AC Transport Loss in Conductor on Round Core Cables

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

Research on Fault Current Endurance Capability of Concentric HTS Cable

Real-time simulation of large-scale HTS systems: multi-scale and homogeneous models using T-A formulation

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Numerical Simulations on the AC Loss of REBCO Stacks under Rotating Magnetic Fields

Electromagnetic characterization of high-temperature superconducting cables with partial tape faults

Critical current characteristics and ampere force distribution of a novel HTS cable with different transposition lengths