Abstract:Li 1+x Ti 2 −x Yb x (PO 4 ) 3 (0 ≤ x ≤ 0.3) materials were prepared via a conventional solid-state reaction and characterised via powder X-ray diffraction (XRD), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and electrochemical impedance spectroscopy (EIS). The substitution of Ti 4+ by Yb 3+ in LiTi 2 (PO 4 ) 3 increases unit cell parameters and the amount of lithium in NASICON phase (S.G. R c), but its incorporation is limited to 0.24/formula. The partial substitution of titanium by ytterbium enlarges diffusion channels and increases Li + ion mobility in Li 1+x Ti 2−x Yb x (PO 4 ) 3 (0 ≤ x ≤ 0.3) series. Li–Li repulsion favours the allocation of lithium at M3 (0.07, 0.34, 0.07) at the expense of M1 (0,0,0) sites in the NASICON structure, increasing Li + ion conductivity. The presence of paramagnetic Yb 3+ ions causes severe broadening of NMR signals which precludes structural analyses. Among the investigated samples, Li 1.2 Ti 1.8 Yb 0.2 (PO 4 ) 3 showed the best "bulk" conductivity (1.98 × 10 −3 S.cm −1 at room temperature) and a lower activation energy ( E a = 0.29 eV). The increment of ceramic pellet density decreased the grain-boundary resistance, improving transport properties. In particular, the "overall" conductivity at room temperature increased from 1.18 × 10 −7 ( E a = 0.45 eV) in LiTi 2 (PO 4 ) 3 to 1.01 × 10 −5 S.cm −1 ( E a = 0.33 eV) in Li 1.2 Ti 1.8 Yb 0.2 (PO 4 ) 3 . The stability of NASICON phases and the small amount of secondary phases make x = 0.2 sample a good candidate for solid electrolytes in all solid-state batteries (ASSBs). In these samples, "overall" conductivity is conditioned by "core–shell" structures, where external shells are enriched in Yb and Li ions. Above x = 0.2, the formation of secondary YbPO 4 and LiTiPO 5 phases at the NASICON particle surface decreased "overall" conductivity.

Sites and Mobility of Lithium along the Li 1+ x Ti 2- x In x (PO 4 ) 3 (0 ≤ x ≤ 2) Series Deduced by XRD, NMR, and Impedance Spectroscopy

Effect of rare earth ytterbium (RE-Yb3+) ions on structure and electrical properties of the Li1+xTi2−xYbx(PO4)3 (0 ≤ x ≤ 0.3) NASICON series

Composition-dependent Optical, Dielectric and D-Orbital Electron Characteristic of High-Throughput Horizontal Composition Gradient Li1-xMgxTi2O4 Combinatorial Film

Effect of Li doping and Li, La co-doping on the structure and physical properties of LaBa2Cu3Oy

Influence of preparation temperature on ionic conductivity of titanium-defective Li1+4xTi2−x(PO4)3 NASICON-type materials

Structural Evolution and Li Dynamics in Nanophase Li3PS4 by Solid-State and Pulsed-Field Gradient NMR

Structure and Conductivity of Perovskites Sr1−xLaxTi1−xCrxO3

Electrical and Structural Properties of Li1.3Al0.3Ti1.7(PO4)3-Based Ceramics Prepared with the Addition of Li4SiO4

Investigation on Performance of Li(Ni0.5Co0.2Mn0.3)1−xTixO2 Cathode Materials for Lithium-Ion Battery

Elucidating the local structure of Li 1+ x Al x Ti 2– x (PO 4 ) 3 and Li 3 Al x Ti 2– x (PO 4 ) 3 ( x = 0, 0.3) via total scattering

Solid State Reaction Synthesis and Characterization of Lithium Lanthanum Titanate Lithium-Ion Conducting Solid Electrolyte with Different Li to La Content

Lithium-Ion Transport in Nanocrystalline Spinel-Type Li[InxLiy]Br4 as Seen by Conductivity Spectroscopy and NMR

The Study on the Substitution In3+and Nd5+ into Perovskites-Type Compounds Li3xLn0.67-xIny Ti1-2yNbyO3

Structural and electrical properties of ceramic Li-ion conductors based on Li$_{1.3}$Al$_{0.3}$Ti$_{1.7}$(PO$_4$)$_3$-LiF

Structural, spectroscopic and electrochemical study of V5+ substituted LiTi2(PO4)3 solid electrolyte for lithium-ion batteries

Microstructure and ionic conductivity of Li0.5-La0.5(Ti1-Nb )O3 solid-state electrolytes

Study of Li2+2xTi1-xCux (NbO4)2 used as cathode for lithium ion battery

Tartaric Acid-Assisted Sol–gel Synthesis of LiNi0.5Co0.5−Ti O2 (0 ⩽x⩽ 0.5) As Cathode Materials for Lithium-Ion Batteries

The relationship between the defect structure and dielectric properties of (La, Li) co-doped SrTiO3

Sol-gel Synthesis of LiSICON compound and their studies by X-ray powder diffraction, infrared, magnetic and impedance spectroscopy

Effect of Sintering Temperature on Microstructure and Transport Properties of Li3xLa2/3−xTiO3 with Different Lithium Contents