Abstract:A series of LiNi0.5Co0.5−xTixO2 (0⩽x⩽0.5) are prepared by a tartaric acid-assisted sol–gel technique. The phase formation process is observed by TG–DTA. It is found that the target product appears at a temperature higher than 400°C and completes to phase formation at 700°C. The crystal structure and morphology are characterized by XRD, SEM and Raman spectroscopy. XRD patterns show that the as-prepared sample transforms from hexagonal structure into cubic structure with the increase of Ti content in LiNi0.5Co0.5−xTixO2. Raman spectra also demonstrate the successive substitution of Ti for Co in the structure with band blue-shift phenomenon. SEM images confirm that the as-prepared sample exhibits narrow and regular particles with the size between 0.5 and 1.5μm. The apparent particle size of sample starts to decrease with x⩽0.1, and the gradually increases by introducing Ti dopant with higher content (x⩾0.15). The electrochemical behavior of the sample displays different characteristics after Ti substitution. It is found that the initial working potential increases with the increase of Ti doping content. As a result, the initial lithium storage capacity for trace Ti-doped sample is higher than that delivered by the pristine one. The decrease of reversible capacity for high degree Ti-doped sample is ascribed to the electrochemical inactivity of the cubic compound in the sample. Therefore, trace Ti doping is beneficial to achieve promising cathode material for lithium-ion batteries.

Study of Li2+2xTi1-xCux (NbO4)2 used as cathode for lithium ion battery

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Investigation on Performance of Li(Ni0.5Co0.2Mn0.3)1−xTixO2 Cathode Materials for Lithium-Ion Battery

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

TiO2 Nanoparticles Assisted LiNbO3-Coated LiNi0.8Co0.1Mn0.1O2 Cathode for Lithium-Ion Batteries

Structure and High Rate Performance of Ni2+ Doped Li4Ti5O12 for Lithium Ion Battery

Ion Exchange Method to Synthesis LiMn1-xCoxO2 and Characterization as Cathode Materials for Lithium-Ion Batteries

Structural and electrochemical characterization of LiMn2-2xLixNixO4 (0 <= x <= 0.1) cathode materials

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Tartaric Acid-Assisted Sol–gel Synthesis of LiNi0.5Co0.5−Ti O2 (0 ⩽x⩽ 0.5) As Cathode Materials for Lithium-Ion Batteries

Structural and electrochemical characterization of (0 ≤ x ≤ 0.1) cathode materials

Structure and Electrochemical Performance of Niobium-Substituted Spinel Lithium Titanium Oxide Synthesized by Solid-State Method

Synthesis and Electrochemical Properties of Nb-doped Li3V2(PO4)3/C Cathode Materials for Lithium-Ion Batteries

Co‐doping of Al3+ and Ti4+ and electrochemical properties of LiNiO2 cathode materials for lithium‐ion batteries

Synthesis, Characterization and Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2cathode Materials for Lithium-Ion Batteries

Synthesis and Characterization of LiNi0.6Mn0.4−xCoxO2 As Cathode Materials for Li-ion Batteries

Nano-TiO 2 (B) coated LiMn 2 O 4 as cathode materials for lithium-ion batteries at elevated temperatures

Fe Doped Li1.2Mn0.6-x/2Ni0.2-x/2FexO2 (x≤0.1) As Cathode Materials for Lithium-Ion Batteries

Study of Spherical Li1.2-xNaxMn0.534Ni0.133Co0.133O2 Cathode Based on Dual Li+/Na+ Transport System for Li-ion Batteries