Abstract:With a constant push to shrink size and elevate power density, the heat flux in GaN-based devices is drastically intensified, requiring effective cooling to control junction temperature. This work presents an embedded manifold microchannel cooling (EMMC) arrangement targeted at mitigating junction temperature, in which microchannels are directly etched in the GaN substrate to extract heat generated due to self-heating. The single-phase laminar flow of deionized water through near-junction microchannels has been investigated in a unit-cell mimicking a recently reported GaN power converter with EMMC arrangement. The effects of geometrical parameters of the manifold and microchannel, heat flux and flow rate on the thermal-hydraulic performance of the unit-cell model are thoroughly studied. High heat transfer coefficients in the order of 105 W/(m2·K) associated with the near-junction microfluidic single-phase flow are acquired, which demonstrates the excellent heat extraction capability of EMMC applied to GaN-based devices. The unit-cell model in the prediction of the thermal performance of a large-scale EMMC multifinger GaN device is in good agreement with experiment and capable of providing detailed fluid flow and temperature distributions for design optimization. Furthermore, a capped diamond heat spreader is integrated with the EMMC GaN device to reduce junction thermal spreading resistance. It is shown that high die heat flux in the range 0.86‒3.01 kW/cm2 can be effectively removed for the 10-µm-thick diamond capped GaN-on-SiC EMMC device within a junction temperature range 48‒110°C. This new EMMC arrangement complemented with capped diamond holds promise as an ultimate near-junction cooling solution that facilitates the implementation and development of high-power compact GaN-based devices.

Enhanced performance of Ku-band GaN MMIC PA through embedded microfluidic cooling

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

A High-Efficiency K-band MMIC Linear Amplifier Using Diode Compensation

The Design and Thermal Reliability Analysis of a High-Efficiency K-Band MMIC Medium-Power Amplifier with Multiharmonic Matching

Design of X/Ku Dual-Wideband GaN Power Amplifier MMIC Based on Coupled Multiresonator Matching Networks

Impact of microfluidic cooling on high power amplifier RF performance

X-Band High-Efficiency Continuous Class B Power Amplifier Gan Mmic Assisted By Input Second-Harmonic Tuning

Electro-Thermal Co-Optimization Design of GaN MMIC PA

A 4 W K-Band Gaas Mmic Power Amplifier With 22 Db Gain

Active Thermal Management of GaN-on-SiC HEMT with Embedded Microfluidic Cooling

Near-junction microfluidic cooling for GaN HEMT with capped diamond heat spreader

A High Power Density Ku‐Band GaN Power Amplifier Based on Device‐Level Thermal Analysis

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A Broadband GaN Power Amplifier MMIC Utilizing a Non-Uniform Distributed Topology

Design of Broadband High-Gain GaN MMIC Power Amplifier Based on Reactive/resistive Matching and Feedback Technique

Design of an Efficient 24–30 GHz GaN MMIC Power Amplifier Using Filter-Based Matching Networks

A Microjet Array Cooling System for Thermal Management of Active Radars and High-Brightness LEDs

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

A Double-Sided Cooling GaN Power Module with High Thermal Performance

Modified elliptic response bandpass filtering integrated high‐efficiency GaN MMIC power amplifier at 24–28 GHz

An E band MMIC power amplifier design using 100 nm T‐Gate GaN HEMT on SiC