Abstract:In order to improve the thermal conductivity of W composites as plasma-facing materials, the interface bonding and interfacial thermal resistance of the composites are the key issues to be solved. Based on our previous study, although Si coating on diamond surface can improve the interface bonding and thermal conductivity of the composite, there still existed the interfacial reaction between W and diamond, which produced more low thermal conductivity compounds (WC/W 2 C) and added the interfacial thermal resistance of the composites. To further improve the interface bonding and increased the thermal conductivity of diamond/W composites, the Si-coated diamonds were used to prepare the Si-SiC dual layer on diamond via vacuum heat treatment and then to fabricate diamond/W composites (HT-coated diamond/W composite). The effects of temperature and holding time of the heat treatment on coating and its interface bonding with the composites were investigated by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results showed that a stable and dense Si-SiC-diamond structure was formed after heat treatment at 1200 °C for 1 h, and the thickness of SiC transition layer was about 20 nm. Thermodynamic analysis demonstrated the reaction rate of SiC increased gradually first and then sharply from 1000 °C to 1400 °C. The integrity of the coating on the diamond surface was strongly impacted by residual compressive stress of the SiC layer, and its value increased with the SiC thickness. The Si-SiC dual layer evidently improved the interface bonding and thermal conductivity of diamond/W composite under the combined influence of reaction diffusion at SiC-W interface, inter-diffusion at W-Si interface, and the orientation relationship at diamond-SiC interface. Theoretical thermal analysis proved that HT-coated diamond/W composite possessing lower interface thermal resistance than that of Si-coated diamond/W composite and raw diamond/W composite achieved higher thermal conductivity of 205 W m −1 K −1 .

Dielectric properties of diamond/SiC composite fabricated by Si vapor infiltration process

Investigation of Electrical and Thermal Properties of Epoxy Resin/Silicon Carbide Whisker Composites for Electronic Packaging Materials

Preparation of diamond/SiC composites by the liquid silicon infiltration method and their microstructure and properties

Microwave Absorbability of Unidirectional SiC Fiber Composites As a Function of the Constituents’ Properties

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Optimal Design And Loss Mechanism Analysis Of Microwave Absorbing Unidirectional Sic Fiber Composites With Broad Absorption Band And Good Polarization Stability

Effect of diamond content on microstructure and properties of C/SiC-diamond composites

Investigation of the Fabrication of Diamond/SiC Composites Using α-Si3N4/Si Infiltration

Effects of phenolic resin contents on microstructures and properties of c/sic‐diamond composites

Enhancing High-Frequency Dielectric Properties of Beta-SiC Filled Nanocomposites from Synergy between Percolation and Polarization

Ultra-temperature performance characterization of additive manufactured diamond/SiC and carbon fiber/SiC composites

Research on maximizing the diamond content of diamond/SiC composite

Dielectric response and microwave absorption properties of SiCw/SiCf composites derived from carbon fiber

Synthesizing SiC layer on diamond by heat treatment and its effects on density and thermal conductivity of diamond/W composite

Realizing enhanced dielectric and mechanical performance of polyvinylidene fluoride/SiC nanocomposites through a bio-inspired interface design

SiC@SiO2 Core@shell Filler Reinforced Polymer Composites with High Dielectric Permittivity and Low Loss

Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration

Diamond matter-enabled low-leakage conductance to achieve the balanced dielectric properties of PVDF/ZrC/diamond blend films

Effects of diamond particle size on microstructure and properties of diamond/Al-12Si composites prepared by vacuum-assisted pressure infiltration

Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix

Interfacial Characterization and Thermal Conductivity of Diamond/Cu Composites Prepared by Liquid-Solid Separation Technique