Abstract:The unimodal diamond and bimodal diamond modified by siloxane enhanced the thermal conductivity and heat transfer performance of phenolic resin composites. Thermal conductive polymer composites have broad application prospects in the field of thermal management. However, due to intrinsically low thermal conductivity of polymers, even if fillers with high mass fraction are filled, the thermal conductivity of polymer composites cannot be significantly improved. In this paper, bimodal diamond particles (70 wt.% 150 μm and 22 wt.% 25 μm) were incorporated into phenolic resin to construct continuous heat transfer pathways by close packing, thereby enhancing its thermal conductivity. The results indicated that diamond particles with smaller particle size can effectively bridge the gaps between larger ones, forming a continuous for heat conduction. As a result, a maximum thermal conductivity value of 12.45 W/(m·K) can be achieved, which is 65.5 times, 9.8 times and 8.4 times higher than pure phenolic resin, 25 μm diamond particles reinforced phenolic resin composite and 150 μm diamond particles reinforced phenolic resin composite, respectively. Furthermore, heat dissipation and water cooling experiments also confirm the superior heat dissipation performance of phenolic resin composites reinforced with bimodal diamond particles. When the heating voltage is 10 V and the water cooling rate is 30 mL/min, the upper surface temperature of bimodal diamond composites is 129.2°C lower than that of pure phenolic resin. This investigation provides a new type of polymer composite with high thermal conductivity, which has promising prospects for application in thermal management. It also provides new insights for preparing polymer composites with high thermal conductivity by close packing of bimodal particles. Highlights Surface modification of the filler enhances its combination with resin. The interfacial bonding will be enhanced by D–OH bond on diamond surface. Bimodal diamond particles lead to the formation of a closely packed structure. This special structure can form a three‐dimensional heat conduction network. The highest TC of the DD/PR composite is 12.45 W/(m·K).

Effects of phenolic resin contents on microstructures and properties of c/sic‐diamond composites

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Effect of diamond content on microstructure and properties of C/SiC-diamond composites

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Effect of impregnated phenolic resin on the properties of Si–SiC ceramic matrix composites fabricated by SLS-RMI

Preparation of diamond/SiC composites by the liquid silicon infiltration method and their microstructure and properties

Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix

The effects of ZrSi 2 on the ablation and insulation performances of low-density carbon-phenolic composites

Research on maximizing the diamond content of diamond/SiC composite

Preparation and thermal conductivity of bimodal diamond particles reinforced phenolic resin composites

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Effect of initial density on thermal conductivity of new micro‐pipeline heat conduction C/SiC composites

Effects of SiC contents on the microstructure and mechanical properties of Al4SiC4–SiC ceramic composites

Preparation and Properties of C/SiC Composites Reinforced by High Thermal Conductivity Graphite Films

Effects of Interphase Thickness on Damping Behavior of 2D C/SiC Composites

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process