Abstract:This paper deals with the bearing capacity determination of strip footing on a rock mass in hilly area by considering the influence of inclined and eccentric loading. Applying the generalized Hoek-Brown failure criterion, the failure behavior of the rock mass is modeled with the help of the power cone programming in the lower bound finite element limit analysis framework. Using bearing capacity factor ( N σ ), the change in bearing capacity of the strip footing due to the occurrence of eccentrically inclined loading is presented. The variations of the magnitude of N σ are obtained by examining the effects of the Hoek-Brown rock mass strength parameters (uniaxial compressive strength ( σ ci ), disturbance factor ( D ), rock parameter ( m i ), and Geological Strength Index (GSI)) in the presence of different magnitudes of eccentricity ( e ) and inclination angle ( λ ) with respect to the vertical plane, and presented as design charts. Both the inclined loading modes, i.e., inclination towards the center of strip footing ( +λ ) and inclination away from the center of strip footing ( −λ ), are adopted to perform the investigation. In addition, the correlation between the input parameters and the corresponding output is developed by utilizing the artificial neural network (ANN). Additionally, from sensitivity analysis, it is observed that inclination angle ( λ ) is the most sensitive parameter. For practicing engineers, the obtained design equation and design charts can be beneficial to understand the bearing capacity variation in the existence of eccentrically inclined loading in mountain areas.

Ultimate bearing capacity of strip footings above rectangular voids in Hoek-Brown rock masses

Stability Charts for Closely Spaced Strip Footings on Hoek–Brown Rock Mass

Ultimate bearing capacity of a foundation on the rock media due to the presence of a circular void: design tables, failure mechanism, and recommendations

Ultimate bearing capacity analysis of shallow strip footing based on second-order cone programming optimized incremental loading finite element method

Calculation of ultimate bearing capacity factor N gamma for rough strip footings

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

The Bearing Capacity Factor Nγ of Strip Footings on C–ϕ–γ Soil Using the Method of Characteristics

Modified pseudo–dynamic bearing capacity of strip footing on rock masses

Ultimate bearing capacity of strip footing on sands under inclined loading based on improved radial movement optimization

Kinematic bearing capacity analysis of strip footings on reinforced soils using discretisation technique

Semi-empirical Solution on Bearing Capacity of Strip Footing Considering Unit Weight of Soil

Analysis of Bearing Capacity for Strip Footings by Reproducing Kernel Particle Method

Solution and error evaluation for bearing capacity of rough strip footings

STUDY ON ULTIMATE BEARING CAPACITY OF SOFT SANDY GRAVEL ROCK FOUNDATION

Effect of eccentric and inclined loading on the bearing capacity of strip footing placed on rock mass

The Effect of the Intermediate Principal Stress on the Ultimate Bearing Capacity of a Foundation on Rock Masses

Semi‐analytical solution for ultimate bearing capacity of smooth and rough circular foundations on rock considering three‐dimensional strength

Upper bound analysis of rectangular surface footings on clay with linearly increasing strength

Rocking Vibration of a Rigid Strip Footing on Saturated Soil

Effect of Intermediate Principal Stress on the Bearing Capacity of Footings in Soft Rock