Abstract:The stability of strip footings subjected to eccentrically inclined loads is critical for reliable foundation design. This study investigates the effect of a circular unlined tunnel in a rock mass on the ultimate bearing capacity (UBC) of a foundation with width B under inclined and eccentric loads. Adaptive finite element limit analysis was employed to evaluate the reduction in UBC of the footing resting above a tunnel. The examined critical parameters include normalized load eccentricity ( e / B ), load inclination ( β ), and horizontal and vertical distances of the tunnel from the foundation ( P / B and Q / B , respectively), along with rock mass properties. The results reveal that for e / B ≥ 0.25 and β ≤ 60°, the reduction coefficient, R c ≥ 0.90, suggesting that the presence of a tunnel has a minimal impact on the load-bearing capacity of the footing, with failure primarily governed by load eccentricity and inclination. Additionally, potential failure mechanisms are explored, showing that at lower e / B , higher β , and lower Q / B , the tunnel significantly affects footing's failure envelope. Conversely, at higher e / B and lower β , failure is due to rotational effects of footing, regardless of the tunnel's position. To predict the R c more accurately, due to the time-consuming nature of direct calculations, both MLR and ANN models were developed. The MLR model provided a baseline for comparison, while the ANN model, with a coefficient of determination ( R 2 ) of 0.98, demonstrated superior accuracy compared to the R 2 = 0.96 of MLR. Using both approaches ensured robust and efficient predictions of R c . Since R c does not directly provide the reduced UBC of footing due to presence of tunnel, the study introduced bearing capacity factor ( N c ) to enable direct calculation of the reduced UBC of footing. These findings offer theoretical guidelines for preliminary design and provide practitioners with an effective tool for evaluating UBC reduction in complex loading scenarios involving tunnels.

Effect of eccentric and inclined loading on the bearing capacity of strip footing placed on rock mass

Effect of Fabric Anisotropy on Bearing Capacity and Failure Mode of Strip Footing on Sand: an Anisotropic Model Perspective

Probabilistic bearing capacity of eccentrically loaded strip footing on spatially random rock mass using correlation-controlled LHS sampling

Influence of rotated anisotropy and spatial variability of undrained clay on bearing capacity of strip footings under eccentric loading

Ultimate Bearing Capacity Prediction of Eccentrically Inclined Loaded Strip Footings

The Effect of Loading Inclination and Eccentricity on the Bearing Capacity of Shallow Foundations: A Review

A pseudo-static approach to the seismic bearing capacity of eccentrically loaded footing lying on rock obeying a generalized Hoek–Brown strength criterion

Ultimate bearing capacity of strip footings above rectangular voids in Hoek-Brown rock masses

Stability Charts for Closely Spaced Strip Footings on Hoek–Brown Rock Mass

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

Ultimate Bearing Capacity of Strip Footing on Sand Underlain By Clay Under Inclined Load

Assessing foundation behaviour under complex loading near tunnels

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Solution and error evaluation for bearing capacity of rough strip footings

Ultimate bearing capacity of strip footings on Hoek-Brown rock slopes – A stress characteristics solution

Effect of Intermediate Principal Stress on the Bearing Capacity of Footings in Soft Rock

Ultimate bearing capacity of strip footing on sands under inclined loading based on improved radial movement optimization

Physical model study on failure mechanism of strip footing on reinforced granular deposit

Rocking Vibration of a Rigid Strip Footing on Saturated Soil

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Anisotropic Discontinuous Rock Mass Based on the Hoek–Brown Criterion

Modified pseudo–dynamic bearing capacity of strip footing on rock masses