Abstract:ABSTRACT With the acceleration of urbanization, the stability of the foundation is being more crucial to the performance and service of the superstructure. As our understanding of the factors influencing soil's physical and mechanical behavior deepens, it becomes increasingly challenging for traditional limit equilibrium and limit analysis methods to accurately consider the complex factors affecting foundation stability, such as initial fabric anisotropy caused by the particle morphology and geological deposition in sand. Although some scholars had used advanced constitutive models in the finite element method (FEM) to investigate the influence of initial fabric anisotropy on mechanical responses of foundations, this approach failed to reveal the microscopic information underlying the shear failure of sandy soil foundations. In this study, the influence of the initial fabric anisotropy of sandy soil on the ultimate bearing capacity and shear failure mode of shallow foundation is studied using the hierarchical FEM and discrete element method (DEM) coupling analysis method. Four representative volume elements (RVEs) with varying initial bedding plane angles are constructed in DEM for characterizing different initial fabric anisotropies, and the specific stress–strain information of DEM RVEs is directly passed into the corresponding Gauss points in FEM to replace the conventional constitutive model. Numerical results show that the initial fabric anisotropy affects the ultimate bearing capacity and shear failure mode of shallow foundations significantly, and the corresponding micromechanical behaviors at different local Gauss points have been explored, which advances our understanding of the micromechanisms underlying the progressive shear failure of sandy soil foundations significantly.

Ultimate bearing capacity analysis of shallow strip footing based on second-order cone programming optimized incremental loading finite element method

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Semi-empirical Solution on Bearing Capacity of Strip Footing Considering Unit Weight of Soil

Ultimate bearing capacity of strip footings above rectangular voids in Hoek-Brown rock masses

An implicit stabilized node-based smoothed finite element method for ultimate bearing capacity analysis of strip footing

Stability and Deformation Analysis for Geotechnical Problems with Nonassociated Plasticity Based on Second-Order Cone Programming

Calculation of ultimate bearing capacity factor N gamma for rough strip footings

Solution and error evaluation for bearing capacity of rough strip footings

Ultimate bearing capacity of strip footing on sands under inclined loading based on improved radial movement optimization

Seismic Bearing Capacity of Strip Footings with Modified Pseudo-dynamic Method

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

The Bearing Capacity Factor Nγ of Strip Footings on C–ϕ–γ Soil Using the Method of Characteristics

Kinematic bearing capacity analysis of strip footings on reinforced soils using discretisation technique

Analysis of the End-Bearing Capacity of Piles in Sand under Limited Region Failure by a Mixed Zero-Extension Line Method

A FEM‐DEM Coupling Analysis on Bearing Capacity of Sandy Soil Foundation Considering Fabric Anisotropy

A mixed selective edge-based smoothed PFEM with second-order cone programming for geotechnical large deformation analysis

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Analysis of Bearing Capacity for Strip Footings by Reproducing Kernel Particle Method

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Quantitative bearing capacity assessment of strip footings adjacent to two-layered slopes considering spatial soil variability