Abstract:The stability of strip footings subjected to eccentrically inclined loads is critical for reliable foundation design. This study investigates the effect of a circular unlined tunnel in a rock mass on the ultimate bearing capacity (UBC) of a foundation with width B under inclined and eccentric loads. Adaptive finite element limit analysis was employed to evaluate the reduction in UBC of the footing resting above a tunnel. The examined critical parameters include normalized load eccentricity ( e / B ), load inclination ( β ), and horizontal and vertical distances of the tunnel from the foundation ( P / B and Q / B , respectively), along with rock mass properties. The results reveal that for e / B ≥ 0.25 and β ≤ 60°, the reduction coefficient, R c ≥ 0.90, suggesting that the presence of a tunnel has a minimal impact on the load-bearing capacity of the footing, with failure primarily governed by load eccentricity and inclination. Additionally, potential failure mechanisms are explored, showing that at lower e / B , higher β , and lower Q / B , the tunnel significantly affects footing's failure envelope. Conversely, at higher e / B and lower β , failure is due to rotational effects of footing, regardless of the tunnel's position. To predict the R c more accurately, due to the time-consuming nature of direct calculations, both MLR and ANN models were developed. The MLR model provided a baseline for comparison, while the ANN model, with a coefficient of determination ( R 2 ) of 0.98, demonstrated superior accuracy compared to the R 2 = 0.96 of MLR. Using both approaches ensured robust and efficient predictions of R c . Since R c does not directly provide the reduced UBC of footing due to presence of tunnel, the study introduced bearing capacity factor ( N c ) to enable direct calculation of the reduced UBC of footing. These findings offer theoretical guidelines for preliminary design and provide practitioners with an effective tool for evaluating UBC reduction in complex loading scenarios involving tunnels.

Ultimate bearing capacity of a foundation on the rock media due to the presence of a circular void: design tables, failure mechanism, and recommendations

Ultimate bearing capacity of strip footings above rectangular voids in Hoek-Brown rock masses

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Assessing foundation behaviour under complex loading near tunnels

Semi‐analytical solution for ultimate bearing capacity of smooth and rough circular foundations on rock considering three‐dimensional strength

STUDY ON ULTIMATE BEARING CAPACITY OF SOFT SANDY GRAVEL ROCK FOUNDATION

BEARING CAPACITY OF FOUNDATION IN VARYING POSSIBLE LIMIT STATES

A Simplified Numerical Approach to Predict Bearing Capacity of Soil for Shallow Foundation

Undrained Bearing Capacity of Spudcan under Combined Loading

Calculation of ultimate bearing capacity factor N gamma for rough strip footings

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

Ultimate Bearing Capacity of Strip Footing on Sand Underlain By Clay Under Inclined Load

Ultimate bearing capacity of strip footings on Hoek-Brown rock slopes – A stress characteristics solution

Rocking Vibration of a Rigid Strip Footing on Saturated Soil

Vertical Bearing Capacity of Foundations with Large Embedment Depth in Normally Consolidated Clay

Effect of foundation surface roughness on ultimate bearing capacity of an eccentrically loaded foundation

Stability Charts for Closely Spaced Strip Footings on Hoek–Brown Rock Mass

EQUIVALENT VERTICAL DYNAMIC STIFFNESS FOR EMBEDDED RIGID CYLINDRICAL FOUNDATION IN SATURATED SOIL

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Rupture sismique des fondations par perte de capacité portante: Le cas des semelles circulaires