Abstract:How to numerically describe and reveal the mixed tensile-shear fracture in metallic structures subjected to impulsive loadings is still a challenging problem due to the complexity that both fracture initiation and crack formation are strongly affected by the stress states induced by the dynamic impulse loadings. In this paper, an elastic–plastic phase-field model is developed to capture the mixed tensile-shear ductile fracture of impulsively loaded metal plates. Compared with the existing elastic–plastic phase-field fracture model, the stress triaxiality and Lode parameter dependent fracture initiation energy threshold locus and equivalent effective critical energy release rate are introduced to describe the stress state-dependent fracture initiation and crack formation under complex loadings. The damage parameters used in the proposed model can be calibrated with standard test data, and the calibrated model is applied to study the dynamic failure of clamped mild steel plates subjected to impulsive loading. The results show that the predicted dynamic failure of metal plates under different impulse loadings compares well with the experimental results, which verifies the ability of the proposed model to simulate ductile fracture under complex stress states. The competitive mechanism of tensile and shear fracture during the process from partial to complete tearing of the plate is further revealed. It can be concluded that as the damage evolves, the stress state in the material would approach the one with a lower equivalent effective critical energy release rate, which maximizes the energy dissipation through the fracture. This study is meaningful for evaluating and designing metal structures with better dynamic load-carrying capacity.

Influence of Lode parameter on damage and fracture behavior of polyethylene materials

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

Research on Accumulative Plastic Damage for Low-Cycle Fatigue Analysis of Hull Notched Plate

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence

A phase field model for ductile fracture considering the strain rate, stress triaxiality and Lode angle parameter

Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions

Effect of elliptical notches on mechanical response and progressive damage of FMLs under tensile loading

Experimental characterization and numerical modelling of the translaminar fracture of woven-ply hybrid fibers reinforced thermoplastic laminates

Fracture Characters and Damage Mechanism of the Notched AS4/PEEK Composite Laminate

Research on Damage Evolution in Thick Steel Plates

Numerical Study on the Damage Efficiency of Half-Premade Fragmented PELE

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Experimental Study on Characterizing Damage Behavior of Thermoplastics

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

A rate-dependent damage mechanics model for predicting plasticity and ductile fracture behavior of sheet metals at high strain rates

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading

Low velocity impact behavior and simulation of parametric effect analysis for UHMWPE/LLDPE thermoplastic composite laminates

Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques

Low-velocity impact responses of the stiffened composite laminated plates based on the progressive failure model and the layerwise/solid-elements method