Abstract:Solid propellant is a composite material exhibiting classic nonlinear viscoelastic mechanical characteristic, which is due in a large part to a cumulative damage process caused by the formation and growth of microflaws inside. The standard relaxation tests and uniaxial tension tests under different velocities of hydroxyl-terminated polybutadiene (HTPB) propellant are carried out in this paper, where Digital Image Correlation (DIC) technique is applied to record deformation. The experimental results show that the material mechanical behavior is rate-dependent. It is also observed that the yield stress and failure stress are significantly rate-dependent on the tensile velocity. Based on these experimental results, it can be inferred that the stiffness degradation and damage evolution of HTPB propellant are a rate-dependent processes. Therefore, the damage accumulation of HTPB propellant is considered rate-dependent in this research. In order to describe the mechanical characteristic precisely, a nonlinear viscoelastic constitutive model with rate-dependent cumulative damage is developed. The damage model is developed based on the concept of pseudo strain, in which a Prony series representation of viscoelastic material functions is applied. Besides, a rate-dependent damage variable is introduced into the model through considering the rate-dependent characteristics of cumulative damage process. In addition, a new normalized failure criterion is derived on the basis of the proposed damage model, which is independent of strain-rate after normalization. Finally, it is implemented in commercial finite element software for stress analysis to verify the predictive capacities of the damage model. The accuracy of the constitutive model and failure criterion is validated under uniaxial tensile tests of various strain rates.

Experimental Study on Characterizing Damage Behavior of Thermoplastics

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Comparison Among Three Different Approaches to Dynamic Damage Measurement for Polymer Blends

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

Characterization, Modeling and Simulation of the Impact Damage for Polymer Bonded Explosives

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Constitutive Modeling for Large Deformation Behavior of Thermoplastic Olefin

Experiments and Simulations on the Shape Memory Process of Thermally-Induced Shape Memory Polymer Composite Thin-Wall Structure Considering Progressive Damage

A 3D objective material model for elastic-plastic damage behavior of fiber reinforced polymer composites

Micromechanical Modeling of the Mechanical Behavior of Thermoplastic Olefin

Experimental Study on Carbon Fiber/epoxy Laminates under Dynamic Tensile and Their Damage Analysis

Constitutive model for the nonlinear viscoplastic behavior of thermoplastic olefin

Numerical implementation, comparison and validation of a pressure dependent model for polymer composites

Semi-Crystalline Polymers Applied to Taylor Impact Test: Constitutive, Experimental and FEM Analysis

Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Evaluation of Local Plastic Damage in Short Fiber Dispersed Composite

A Comparative Study on the Mechanical Properties of Open-Hole Carbon Fiber-Reinforced Thermoplastic and Thermosetting Composite Materials

Study on the bending behavior of reinforced thermoplastic pipes (RTPs): A theoretical continuum damage model and experimental tests