Effect of SiC Nanoparticles on the Structure and Properties of Ni+W-SiC Nanocoatings
Fafeng Xia,Peng Yan,Chunyang Ma,Yan Liu
DOI: https://doi.org/10.1007/s11665-024-09312-x
IF: 2.3
2024-03-27
Journal of Materials Engineering and Performance
Abstract:Generally, 45 steel is one of the materials commonly used in the manufacture of chemical, agricultural, mechanical, and military metal parts. However, the service life of the part is low due to its low hardness, and poor corrosion and wear resistances. To improve the surface characteristics of 45 steel substrates, Ni+W-SiC nanocoatings were applied to 45 steel samples utilizing magnetic field-assisted pulse electrodeposition (MPE). The composites were evaluated for their compositions, structures, and microhardness using several analytical techniques, including transmission electron microscopy (TEM), scanning electron microscopy (SEM), scanning probe microscopy (SPM), nano indenter, and x-ray diffraction (XRD). The NC30 nanocoatings exhibited fine, compact, and homogeneous structures due to the presence of fine Ni+W grains and SiC nanoparticles (NPs). The size of SiC NPs has a significant influence on the XRD spectra of nanocoatings. The diffraction peaks for Ni+W and SiC appeared to be relatively high and sharp for NC150. After conducting a subsequent examination into the wear and corrosion properties of Ni+W-SiC nanocoatings, the loss in weights of the NC30, NC50, and NC150 coatings was determined to be 0.51, 0.76, and 0.87 g, respectively, following a 36-hour corrosion test. During the process of wear testing, a limited number of minor pits were observed on the NC30 nanocoating surface, indicating that it possesses a high level of wear resistance.
materials science, multidisciplinary