Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. The fiber/matrix interface is a critical item that affects Fiber Reinforced Polymer (FRP) composites mechanical performance due to its control of the load transfer mechanism. Partially bonded interfaces have been shown to affect the failure mode of FRP composites. This article examines the significance of manipulating the fiber/matrix interfacial bond in 3D printed FRP composites on the mechanical performance of multilayer 3D printed FRP composites. Three designs are investigated with different fiber stacking sequences, fiber orientation, and interfacial bond configurations. The designs have a low coefficient of variation in load fractions between layers to enable a gradual load transfer and progressive failure. Utilizing 3D printer chamber temperature changes, a composite with a controlled bond configuration is achieved using thermal blocks. It was observed that the controlled bond configurations resulted in promoting progressive failure and increased the strain at failure of 3D printed FRP composites. The observations of direct tension tests were supported with interlayer shear strength and interfacial adhesion tests which explained the weakened load transfer in the thermal block configurations. Using the interface manipulation strategy with thermal blocks in 3D printed specimens, a 25% lower interlayer shear strength and a 65% lower interfacial adhesion was achieved compared with un-modified interfaces. These changes attribute to the altered load transfer mechanism in 3D printed glass fiber reinforced composites and high strain to failure of up to 5% using high strength high stiffness fiber orientations. This work does not incorporate any new materials into the thermoplastic-fiber 3D printed structure which has been the strategy of past work to modify mechanical performance. Alternatively, a unique approach by using chamber and print bed temperature characteristics to modify the interfacial bond has been adopted that has shown to promote progressive failures and improve ductility in FRP composites. This study furthers the development of ductile designs in FRP composites with 3D printing technology in aerospace, wind, infrastructure, and automobile applications.

3D interfacial material-locking structures to promote bonding strength of dissimilar materials

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Enhancing interlaminar adhesion in multi-material 3D printing: A study of conductive PLA and TPU interfaces through fused filament fabrication

Cooperative enhancement of multi-material interface strength by mechanical interlocking structures and FDM path planning

Single-layer Temperature-Adjusting Transition Method to Improve the Bond Strength of 3D-Printed PCL/PLA Parts

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers

TPMS-based interpenetrating lattice structures: Design, mechanical properties and multiscale optimization

Mechanical properties of modular assembled composite lattice architecture

The effect of material mixing on interfacial stiffness and strength of multi-material additive manufacturing

Rational design and additive manufacturing of grain boundary-inspired, multi-architecture lattice structures

Adhesive bonding of similar/dissimilar three-dimensional printed parts (ABS/PLA) considering joint design, surface treatments, and adhesive types

Regulation of the Interface Compatibility of the 3D-Printing Interpenetration Networks Toward Reduced Structure Anisotropy and Enhanced Performances

Interfacial Bonding Mechanism and Mechanical Performance of Continuous Fiber Reinforced Composites in Additive Manufacturing

Lattice Structures—Mechanical Description with Respect to Additive Manufacturing

Manipulating interfacial bond for controlling load transfer in 3D printed fiber reinforced polymer composites

Interfacial enhancement of CFRP/titanium alloy bonding joint by constructing a 3D interconnected CNTs network

Enhancing the interfacial bond performance of engineered cementitious composites and concrete

Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete

Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing

Enhanced the bonding reliability of titanium alloy and CFRTP via interfacial multiple modification: Synergy of physical interlocking and chemical interaction